CATS software overview

Presentation Index

AutoCATS: From an engineering perspective.

Click here to start

Home : Slide Shows : AutoCATS from a Engineering Perspective 

Table of Contents

  1. Introduction to AutoCATS 
  2. The AutoCATS system 
  3. Accounts for three sources of Variation 
  4. Works with existing CAD drawings 
  5. Menu Side Bar 
  6. Tolerance Model Creation 
  7. PARTS -- Datum References 
  8. Parts are Referenced to the Datum (DRF) 
  9. JOINTS -- Kinematic Joints 
  10. Each Kinematic Joint is referenced to the DRF 
  11. FEATURES --Form & Feature Tolerances 
  12. Tolerance to ANSI Y14.5 Specs 
  13. SPECS -- Assembly Tolerance Specifications 
  14. Critical Engineering Specifications 
  15. LOOPS -- completes the Model 
  16. Closed Vector Loops 
  17. Open Vector Loops 
  18. AutoCATS Tolerance Analyzer 
  19. AutoCATS System 
  20. Variation of Critical Assembly Features 
  21. AutoCATS Analyzer Methods 
  22. Worst Case Analysis 
  23. RSS Analysis -- Reject Prediction 
  24. Assembly Variation Prediction 
  25. AutoCATS Promotes Concurrent Engineering 
  26. Final Slide -- ADCATS information 
 Click Here to go to Overview 

Author: Ken Chase