ADCATS Research Bibliography A through F
Home | ADCATS Info | Search | Site Map | Bulletin Board | Reports & Publications | Bibliography | Contact Us
Bibliography A through F
Home : Tolerancing Bibliography : A through F


Abdel-Rahman, Tarek M.
A Generalized Practical Method for Analytic Solution of the Constrained Inverse Kinematics Problem of Redundant Manipulators The International Journal of Robotics Research. Vol. 10, No. 4, August 1991, pp. 382-395

ABSTRACT

Abernethy, R.B., Benedict, R.P., Dowdell, R.B.
ASME Measurement Uncertainty J. of Fluids Engineering, ASME, vol. 107, no. 2, 1985, pp. 161

ABSTRACT

Acton, F.S., Olds, E.G.
Tolerances--Additive or Pythagorean? Industrial Quality Control, Nov. 1948, pp. 6-13.

ABSTRACT

Agarwal, M.M.
Optimal Synthesis of Tolerance and Clearance in Function Generating Mechanisms-A Parametric Programming Problem ASME Paper 81-DET-5, 1981.

ABSTRACT

Ahang, Genbao, Porchet, Michel
Some New Developments in Tolerance Design in CAD DE-Vol. 65-2, Advances in Design Automation-Volume 2, ASME 1993

ABSTRACT

Allen, George
Tolerances and Assemblies in CAD/CAM Systems CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn,Michigan,June 17-19,1993,pp. 229-240

ABSTRACT

Altschul, Roberto E., Scholz, Friedrich W.
Statistical Tolerancing: A Case Study CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn,Michigan,June 17-19,1993,pp. 199-206

ABSTRACT

Andersen, C.B., Chase,K.W.,Sorensen,C.D.
Recent Developments in Tolerance Analysis Software for Mechanical Assemblies Part B: 2-D Tolerance Allocation Proc. of the ASQC Western Regional Conference-1989, pp. 98-105.

ABSTRACT

Anderson, Archie R.
An Industrial User's Perspective of CAD Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME 1993

ABSTRACT

ASME
Dimensioning and Tolerancing ASME, ANSI Y14.5M - 1982

ABSTRACT

ASME
Preferred Limits and Fits for Cylindrical Parts ASME, USAS B4.1-1978

ABSTRACT

ASME CIME Staff Report
CAD Follows New Scripts pp.62-67 November 1989 Mechanical Engineering

ABSTRACT

Bakos, Frank, Hopp, Theodore, Parratt, Steffen, Robinson, Dean
Questions and Discussions CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,Dearborn,Michigan, June 17-19,1993,ASME,pp. 131-136

ABSTRACT

Balling, Richard J., Free, Joseph C., Parkinson, Alan R.
Consideration of Worst-Case Manufacturing Tolerances in Design Optimization. Journal of Mechanisms, Transmissions and Automation in Design pp 438-441, Vol. 108, December 1986.

ABSTRACT

Ballu, Alex, Mathieu, Luc
Univocal Expression of Functional and Geometrical Tolerances for Design, Manufacture and Inspection CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 31-52

ABSTRACT

Ballu, Alex, Mathieu, Luc
Analysis of Dimensional and Geometrical Specifications: Standards and Models Proceeding of 3rd CIRP Seminars on Computer Aided Toelrancing, Cachan, France, April 27-28, 1993,pp. 157-170

ABSTRACT

Bandler, J.W.
Optimization of Design Tolerances Using Nonlinear Programming. Journal of Optimization Theory and Applications: Vol. 14, No.1, 1974. pp.99-114.

ABSTRACT

Barish, Thomas
How to Design with Shims Product Engineering, Aug. 1957, pp. 164-166.

ABSTRACT

Barton, Russell R., Tsui, Kwok-Leung
Multivariate Yield Maximization Using CAD/CAE Models: Efficient Approximations Based On Mean and Variance DE-Vol. 31, Design Theory and Methodology ASME 1991

ABSTRACT

Baumgarten, J.R., Van Der Werff, K.
A Probabilistic Study Relating to Tolerancing and Path Generation Error Mechanism and Machine Theory, Vol. 20, No. 1, p. 71-76, 1985.

ABSTRACT

Beckwith, Walter, Parsons, Frederick G.
Measurement Methods and the New Standard B89.3.2 Michigan, June 17-19 1993, CRTD-Vol.27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp.31-36

ABSTRACT

Bender, A.Jr.
Statistical Tolerancing as it Relates to Quality Control and the Designer (6 times 2.5 = 9) Society of Automotive Engineers, SAE Paper No. 680490, May 1968

ABSTRACT

Bender, Arthur
"Benderized" Tolerances. A Simple Practical Probability Method ofHandling Tolerances for Limit "Stack-ups" Engineering Dept. Paper, Delco-Remy, Nov. 1963 also: Graphic Science, Dec. 1962, pp 17ff

ABSTRACT

Bennett, G., and Gupta, L.C.
Least-Cost Tolerances II The International Journal of Production Research (1969). Volume 8. No. 2.pp169-170

ABSTRACT

Bennett, G., Gupta, L.C.
Least-Cost Tolerances-1 The International Journal of Production Research (1969), Volume 8, No. 1.pp 65-ff

ABSTRACT

Bennich, Per
Chain of Standards: A New Concept in Tolerancing and Engineering Drawing GPS-Standards-Geometrical Product Specification Standards Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 269-278

ABSTRACT

Beohar, S.B.L., Rao, A.C.
Optimum Stochastic Synthesis of Four Bar Spatial Function Generators Transactions of the ASME, 80-DET-32, pp. 1-4.

ABSTRACT

Beutel, Dean E.
The Practictioner's View of Measurement System Application CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology,Dearborn, Michigan,June 17-19,1993,ASME,pp. 119-130

ABSTRACT

Bhargava, Samir, Grant, B. Marion
Taguchi Methods and Tolerance Assignment: The Wavelength Aspects of Surface Metrology Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 177-186

ABSTRACT

Blanding, K.
Confidence in Fits Mechanical Engineering, March 1978, pp. 29-31

ABSTRACT

Bohling, Dorothea M. and Lawrence A. O'Neill
An Interactive Computer Approach to Tolerance Analysis IEEE Transactions on Computers, Vol. C-19, No. 1, Jan. 1970, pp. 10-16

ABSTRACT

Bourdet, Pierre, Ballot, Eric
Geometrical Behavior for Computer Aided Tolerancing CIRP/JSPE/ASME Proceedings fo the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.143-154

ABSTRACT

Box, George and Soren Bisgaard
Statistical Tools For Improving Designs Mechanical Engineering, January 1988, pp. 32-40.

ABSTRACT

Boyer, David E. and John W. Nazemetz
Introducing Statistical Selective Assembly--A Means of Producing High Precision Assemblies From Low Precision Components American Institute of Industrial Engineers, 1985 Annual Conference, pp. 562-570

ABSTRACT

Boyer, Edward H.
Certification in Tolerancing and Metrology Dearborn, Michigan, June 17-19, 1993, CRTD-Vol. 27,International Forum on Dimenional Tolerancing and Metrology,ASME, pp. 291-296

ABSTRACT

Boyer, M., Stewart, N.F.
Modeling Spaces for Toleranced Objects The International Journal of Robotics Research, Vol. 10, No. 5, October 1991.pp570-582

ABSTRACT

Brandt, D.A.
How Not to Use Statistical Dimensioning Machine Design, Feb. 22, 1973 pp. 111-113

ABSTRACT

Brayton, Robert K., Stephen W. Director, and Gary D. Hachtel
Yield Maximization and Worst-Case Design with Arbitrary Statistical Distributions IEEE Transactions on Circuits and Systems, Vol. Cas-27, No. 9, September 1980,pp.756-762

ABSTRACT

Briggs, C.W.
Dimensional Tolerances for Steel Castings Steel Founders' Society of America, 606 Terminal Tower, Cleveland 13, OH

ABSTRACT

Brooks, K.A.
How to Set Up and Coordinate a Statstical Dimensioning Program Machine Design, Sept. 14, 1961, pp. 140-145

ABSTRACT

Brown, Curtis W.
Feature-Based Tolerancing for Intelligent Inspection Process Definition CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn,Michigan,June 17-19, 1993,pp. 249-258

ABSTRACT

Bryan, James B.
The Deterministic Approach in Metrology and Manufacturing CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,Dearborn,Michigan,June 17-19,1993,ASME,pp. 85-96

ABSTRACT

Buckingham, E.
Dimensions and Tolerances for Mass Production The Industrial Press

ABSTRACT

Burr, I.W.
Dimensioning and Tolerancing for Simplified and Economical Manufacturing ASME Paper 71-DE-4, 1971

ABSTRACT

Burr, I.W.
Specifying the Desired Distribution Rather than Maximum and Minimum Limits Industrial Quality Control, vol 24, no 2, Aug. 1967, pp. 94-101

ABSTRACT

Burr, I.W., and R.E. James
Specifying the Desired Distribution in Lieu of Tolerance Limits--A Systems Approach ASME Paper 74-DE-9, 1974

ABSTRACT

Burr, Irving W.
Some Theoretical and Practical Aspects of Tolerances for Mating Parts Industrial Quality Control, September 1958, pp. 18-22.

ABSTRACT

Burton, Michael F.
Tolerancing: The Key to Parts Interchangeability and Manufacturing Cost The Engineering Society For Advancing Mobility Land Sea Air and Space

ABSTRACT

Bury, K.V.
The Reliability of Probabilistic Mechanical Design ASME Paper 76-WA/DE-7, 1976

ABSTRACT

Cagan, Jonathan, Kurfess, Thomas R.
Optimal Tolerance Allocation Over Multiple Manufacturing Alternatives DE-Vol. 44-2, Advances in Design Automation-Volume 2, ASME 1992,pp.165-170

ABSTRACT

Cao, Qiushu, Krishnaswami, Prakash
Second Order Design Sensitivity Analysis of Kinematically-Driven Mechanical Systems DE-Vol. 44-2, Advances in Design Automation-Volume 2, ASME 1992, pp. 1-5

ABSTRACT

Carlisle, B.H.
Bringing Tight Tolerances to Molded Plastics Machine Design, p. 82-86

ABSTRACT

Chandrupatla, T.R.
Dimensional Accuracy in Turning Cylindrical Shafts ASME Paper No., 1982,pp.10-17.

ABSTRACT

Charbonneau, H.C.
The Application of Statistics to Simple Fixed-Gage Design Transactions of the ASME, Vol. 77,Aug. 1955, pp. 949-956

ABSTRACT

Chase, K. W., and W. H. Greenwood
Design Issues in Mechanical Tolerance Analysis Manufacturing Review, ASME, vol 1, no 1, Mar. 1988, pp. 50-59

ABSTRACT

Chase, K.W., Greenwood, W.H., Loosli, B.G., Hauglund, L.F.
Least Cost Tolerance Allocation For Mechanical Assemblies With Automated Process Selection Failure Prevention and Reliability-1989, ASME Publ. DE-Vol. 16,pp.165-171

ABSTRACT

Chase, K.W., Greenwood, W.H., Loosli, B.G., Hauglund, L.F.
Least Cost Tolerance Allocation for Mechanical Assemblies with Automated Process Selection Manufacture Review, vol. 3 no. 1 p.49 March 1990

ABSTRACT

Chase, K.W., Sorensen, C.D., Andersen, C.B.
Recent Developments in Tolerance Analysis Software for Mechanical Assemblies Part A: Two-Dimensional Modeling Proc. of the ASQC Western Regional Conference-1989, pp.73-80.

ABSTRACT

Chen, J.S.-C., Wang, S., Zug, P.
Optimal Tolerance Design of a Printer Actuator Journal of Mechanisms etc, ASME, Vol. 106, Dec, 1984, p. 510-517.

ABSTRACT

Chen, X., Lind, N.C.
Fast Probability Integration By Three-Parameter Normal Tail Approximation. Structural Safety 1 (1983) 269-276Elsevier Science Publishers B.V., Amsterdam

ABSTRACT

Choi, B K, Yoo, W S, Lee C S
Matrix Representation for NURB Curves and Surfaces Computer Aided Design, vol. 22 ,No.4,May 1990,pp.235-240

ABSTRACT

Choubey, M.
Determining Tolerances in Geneva Mechanisms Machine Design, Oct. 9, 1980, pp. 219-20., Tech Briefs

ABSTRACT

Choubey, M., Rao, A.C.
Optimum Sensitivity Synthesis of a Cam System Incorporating Manufacturing Tolerances ASME Paper 80-DET-31, 1980

ABSTRACT

Chung, J.C.H., Schussel, M.D.
Technical Evaluation of Variational and Parametric Design. Computers in Engineering, ASME,1990,pp. 289-298

ABSTRACT

Chung, Jack C.H., Schussel, Martin D.
Comparison of Variational and Parametric Design Research Report,Structural Dynamics Research Corporation

ABSTRACT

Clement, Andre, Riviere, Alain
Tolerancing Versus Nominal Modeling in Next Generation CAD/CAM System Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing, Cachan, France, April 27-28, 1993,pp. 97-114

ABSTRACT

Clement, Andre, Riviere, Alain, Serre, Philippe
A Declarative Information Model for Functional Requirements CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 1-20

ABSTRACT

Clements, John
Variation Simulation Analysis Solves Problems Before and During Production. Quality Progress pp. 76-77, December 1988.

ABSTRACT

Cochin, Ira and Isakower, Robert
Which component is the troublemaker? System-error analysis. Product Engineering, February 4, 1963, pp. 61-65.

ABSTRACT

Collings, Bruce Jay, Hembree, Barry G.
Initializing Generalized Feedback Shift Register Pseudorandom Number Generators Journal of the Association for Computing Machinery, Vol. 33,No. 4,October 1986,pp.706-711

ABSTRACT

Conry, T.F.
A Method of Optimal Tolerance Selection (Discussion of paper by Ostwald and Huang) J. of Engineering for Industry, ASME, Vol. 100, Aug. 1978, pp. 390-391.

ABSTRACT

Conway, H.G.
The Use of Tolerance Systems Product Engineering-February 1956,pp.164-167

ABSTRACT

Corlew, Gordon T., and Fred Oakland
Monte Carlo Simulation for Setting Dimensional Tolerances Machine Design, May 6, 1976, p. 91-95.

ABSTRACT

Couetard, Y. et Teissandier, D.
A Tolerancing Modes Synthesis: Proportionned Assembly Clearnce Volume Proceedings of 3rd CIRP Seminars Computer Aided Tolerancing, Cachan,France,April 27-28,1993,pp. 75-84

ABSTRACT

Cox, J.J., Anderson, D.C.
Single Model Formulations that Link Engineering Analysis With Geometric Modeling Product Modeling for Computer-Aided Design and Manufacturing,pp. 249-265

ABSTRACT

Cox, N.D.
Tolerance Analysis by Computer Journal of Quality Technology, Vol. 11, No. 2, April 1979,pp. 80-87

ABSTRACT

Cox, Niel D.
How to Perform Statistical Tolerance Analysis ASQC, Basic References in Quality Control, Volume 11, 1986

ABSTRACT

Craig, Mark
Managing Variation by Design Using Simulation Methods Failure Prevention and Reliability-1989, ASME Publ. DE-Vol 16. pp. 153-163.

ABSTRACT

Craig, Mark
Variation By Design Mechanical Engineering pp.52-54. November 1988.

ABSTRACT

D'Errico, John R., Zaino, Nicholas A., Jr.
Statistical Tolerancing Using a Modification of Taguchi's Method Technometrics, November 1988. Vol. 30, No. 4,pp.397-405

ABSTRACT

Dao-Thein, My, and M. Massoud
On the Probabilistic Distributions of Stress and Strength in Design Problems Journal of Engineering for Industry, ASME, Aug. 1975, pp. 983-989

ABSTRACT

Dao-Thien, My
An Approach for Optimum Tolerancing of the Design Components Proc. of the 8th Canadian Congress of Applied Mechanics, Moncton, June 7-12, 1981, pp. 333-334

ABSTRACT

Daschbach, J.M. and Henry Apgar
Design Analysis Through Techniques of Parametric Cost Estimation Engineering Costs and Production Economics, 14 (1988) 87-93

ABSTRACT

David, H.T., McCann, Michael J.
Multiple Tolerancing Problems For Assembling Processes Statistical Laboratory Preprint Series

ABSTRACT

DeDoncker, Dwight and Spencer, Al
Assembly Tolerance Analysis with Simulation and Optimization Techniques. The Engineering Society For Advancing Mobility Land Sea Air and Space.

ABSTRACT

DeFazio, T.L., Edsall, A,C., Gustavson, R.E., Hernandez, J.A., Hutchins, P.M., Leung, H.W., Luby, S.C., Metzinger, R.W., Nevins, J.L., Tung, K.K., Whitney, D.E.
A Prototype of Feature-Based Design For Assembly Advances in Design Automation-1990, Vol.1,ASME Publication No. DE-Vol,23-1,pp.9-16

ABSTRACT

Desrochers, Alain, Maranzana, Roland
Constrained Dimensioning and Tolerancing Assistance for Mechanisms CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 21-30

ABSTRACT

DeVos, L.
Functional Dimensioning Design News, July 21, 1965, pp. 157-165.

ABSTRACT

Dhande, S.G. and J. Chakraborty
Analysis and Synthesis of Mechanical Error in Linkages-A Stochastic Approach Journal of Engineering for Industry, August 1973,pp. 672-676

ABSTRACT

Dhande, S.G., Chakraborty, J.
Mechanical Error Analysis of Spatial Linkages Journal of Mech. Design, 1978, p. 732also ASME paper 77-WA/DE-8

ABSTRACT

Ditlevsen, Ove
Generalized Second Moment Reliability Index J.Struct.Mech., 7(4), 435-451 (1979)

ABSTRACT

Ditlevsen, Ove
Narrow Reliability Bounds for Structural Systems J. Struct. Mech., 7(4), 453-472 (1979)

ABSTRACT

Ditlevsen, Ove
Principle of Normal Tail Approximation Journal of the Engineering Mechanics Division, ASCE, Dec. 1981, pp. 1191-1208

ABSTRACT

Doepker, P.E.
Designing Brake Components Using Variation Simulation Modeling Failure Prevention and Reliability, 1989, ASME Publ. DE-Vol 16,pp. 131-138

ABSTRACT

Dong, Zuomin, Soom, Andres
Automatic Optimal Tolerance Design for Related Dimension Chains Manufacturing Review,vol. 3,no. 4,December 1990,pp. 262-271

ABSTRACT

Dopker, B., Murray, P., Choong, F.N.
An Object Oriented Data Base and Application Management System for Integrated, Interdisciplinary Mechanical system Simulation Advances in Design Automation, ASME Publ. DE 19-3,pp. 81-87

ABSTRACT

Dori, Dov, Miller, James R.
Dynamic 3-D Visualization of Dimensions and Tolerances on Solid Models Using Ansi Standard Advances in Design Automation-1990,Vol.1,ASME Publication No. DE-Vol. 23-1,pp. 137-143

ABSTRACT

Doydum, Cemal, Perreira, N. Duke
Use of Monte Carlo Simulation to Select Dimensions, Tolerances, and Precision for Automated Assembly J. of Mfg Systems,V10,N3,pp. 209-221

ABSTRACT

Dresner, Thomas L., Barkan, Philip
Optimal Tolerance Allocation For Tolerance Stack-ups DE-Vol. 65-2, Advances in Design Automation-Volume 2,ASME 1993

ABSTRACT

Dufosse', Philipp
Automatic Dimensioning and Tolerancing Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing,Cachan, France,April 27-28,1993,pp. 1-10

ABSTRACT

Early, R. and Thompson, J.
Variation Simulation Modeling-Variation Analysis Using Monte Carlo Simulation. Failure Prevention and Reliability-1989, ASME Pub. DE-Vol 16, pp. 139-144.

ABSTRACT

Early, Robert
Statistical Tolerancing Applications at General Motors Corporation Society of Automotive Engineers, Inc., 1988

ABSTRACT

Eaton, Fletcher
Computer Modeling of a Three-Dimensional Assembly ASME Publication 75 DE-21.

ABSTRACT

Edel, D. Henry, Auer, Thomas B.
Determine the Least Cost Combination for Tolerance Accumulations in a Drive Shaft Seal Assembly General Motors Engineering Journal, Fourth Quarter, p. 37-38, 1964. First Quarter, p. 36-38, 1965

ABSTRACT

Edensor, K.
Geometric Analysis of Engineering Designs: Applications National Standards Laboratory Technical Paper No. 14,1961,Australia

ABSTRACT

Edensor, K.
Geometric Analysis of Engineering Designs: Applications National Standards Laboratory Technical Paper,No.16,1961,Australia

ABSTRACT

Eggert, R.J., Mayne, R.W.
Probabilistic Optimal Design Using Successive Surrogate Probability Density Functions Advances in Design Automation-1990,Vol.1,ASME Publication No. DE-Vol,23-1,pp. 129-136

ABSTRACT

Elgabry, A.K.
A Framework For a Solid-Based Tolerance Analysis Computers in Engineering, V2, ASME 1986,pp. 79-84

ABSTRACT

Ellison, B.E.
On Two-sided Tolerance Intervals for a Normal Distribution pp. 762-3####

ABSTRACT

ElMaraghy, Hoda A., ElMaraghy, Waguih H.
A System for Modeling Geometric Tolerances for Mechanical Design Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing,Cachan,France,April 27-28,1993,pp. 11-24

ABSTRACT

Emannel, Richard
Establishing Mechanical Tolerances with CAD/CAM Computer-Aided Engineering, July 1985, pp. 76-80.

ABSTRACT

Emery, J.K.
Roundness Measurement, Part 1-Importance and Interrelationships. Mechanical Engineering,ASME, Part 1, Oct. 1969, pp. 26-29,

ABSTRACT

Etesami, F.
On the Theory of Geometric Tolerancing ASME Computer in Engr., V2, 1987, pp. 327-334

ABSTRACT

Etesami, Faryar
Tolerance Verification through Manufactured Part Modeling Journal of Manufacturing Systems, Vol. 7, No. 3, pp. 223-232

ABSTRACT

Evans, David H.,1
A Statistical Tolerancing Formulation Journal of Quality Technology, Vol. 2, No. 4, October 1970, pp. 226-231.

ABSTRACT

Evans, David H.,2
An Application of Numerical Integration Techniques to Statistical Tolerancing Technometrics, Vol. 9, No. 3, August 1967, pp 441-456

ABSTRACT

Evans, David H.,3
An Application of Numerical Integration Techniques to Statistical Tolerancing, II-A Note on the Error Technometrics, Vol. 13, No. 2, May 1971, p. 315-324.

ABSTRACT

Evans, David H.,4
An Application of Numerical Integration Techniques to Statistical Tolerancing, III - General Distributions Technometrics, Vol. 14, No. 1, February 1972, p. 23-35

ABSTRACT

Evans, David H.,5
Statistical Tolerancing: The State of the Art, Part I. Background Journal of Quality Technology, Vol. 6, No. 4, October 1974, p. 188 - 195.

ABSTRACT

Evans, David H.,6
Statistical Tolerancing: The State of the Art, Part II. Methods for Estimating Moments Journal of Quality Technology, Vol. 7, No. 1, January 1975, p 1-12.

ABSTRACT

Evans, David H.,7
Statistical Tolerancing: The State of the Art, Part III. Shifts and Drifts J. of Quality Technology, vol 7, no 2, April 1975, pp. 72-76

ABSTRACT

Fainguelernt, R. Weill and Bourdet, P.
Computer Aided Tolerance and Dimensioning in Process Planning Annals of the CIRP Vol. 35/1/1986, pp.381-386

ABSTRACT

Fenton, R.G., W.L. Cleghorn and Jing-fan Fu
Allocation of Dimensional Tolerances for Multiple Loop Planar Mechanisms Journal of Mechanisms, Transmissions, and Automation in Design, December 1989, Vol. 111/465-470.

ABSTRACT

Fiessler, B., Neumann, H.J., Rackwitz, R.
Quadratic Limit States in Structural Reliability Journal of the Engineerng Mechanics Division, Aug. 1979, pp. 661-677

ABSTRACT

Fortin, Clement, Chatelain, Jean-Francois
A Geometrical Tolerance Verification APproach for Compolex Cases Including Datum Shift Analysis CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on CAT, Japan, April 5-6, 1995, pp. 337-356

ABSTRACT

Fortini, E.T.
Dimensioning for Interchangeable Manufacture Industrial Press Inc., 1967

ABSTRACT

Foster, Lowell W.
Geo-metrics II Addison-Wesley, 1979

ABSTRACT

Foster, Lowell W.
"Geometric Dimensioning and Tolerancing" Society of Automotive Engineers, SAE Paper No. 680488, 1968.

ABSTRACT

French, T.E., Vierck, C.J., Foster, R.J.
Graphic Science and Design McGraw-Hill Book Co. Fourth Edition pp. 185-213, 637-652, Chapter 7

ABSTRACT

Fu, Jingfan, W.L. Cleghorn and R.G. Fenton
Synthesis of the Dimensional Tolerances of a Slider Crank Mechanism Transactions of the Canadian Society for Mechanical Engineering, Vol. 12, No. 1, 1988, pp. 9-14. Also 10th Applied Mechanism Conference, ASME

ABSTRACT

Fuscaldo-Peelman, Jeff
Optimizing Collet Chuck Designs Using Variation Simulation Analysis VSA Applied Computer Solutions

ABSTRACT

 

The ADCATS site: Home | ADCATS Info | Search | Site Map | Bulletin Board | Reports & Publications | Bibliography | Contact Us