ADCATS Research Bibliography G through L
Gabriele, Gary A.
A Perspective on Engineering Design Education: Where Do Tolerances Fit In? Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 279-290
ABSTRACT
Garcia, Christopher J.
Automating GD&T Quality, June 1988, pp. 56-57.
ABSTRACT
Garrett, R.E. and Allen S. Hall, Jr.
Effect of Tolerance and Clearance in Linkage Design Journal of Engineering for Industry, ASME, February 1969, pp. 198-202.
ABSTRACT
Gauntet, Dominique
Vectorial Tolerancing Model Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing,Cachan,France,April 27-28,1993,pp. 25-50
ABSTRACT
Gavankar, P., Bedworth, D.
Stacked Tolerance Analysis and Allocation Using Assembly Models
ABSTRACT
Gavanker, Prasad, Henderson, Mark R.
Graph-Based Extraction of Protrusions and Depressions from Solid Models Graph-based Feature Extraction-CAD Journal Submission,Fri. Jul 28, 1989
ABSTRACT
Giesecke, F.E., Mitchell, A., Spencer, H.C., Hill, I.L., Loving, R.O.
Engineering Graphics, Second Edition Macmillan Publishing Co., Inc., Chapter 12 and appendix pp. 335-353, 822-829
ABSTRACT
Giordano, Max, Duret, Daniel
Clearance Space and Deviation Space Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing, Cachan, France, April 27-28, 1993,pp. 179-196
ABSTRACT
Gladman, C.A.
Manual for Geometric Analysis of Engineering Designs Australian Trade Publications,1966
ABSTRACT
Gladman, C.A.
Techniques For Applying Probability to the Tolerancing of Machined Dimensions National Standards Laboratory Technical Paper No. 11, 1959 (Australia)
ABSTRACT
Gladman, C.A.
Applying Probability in Tolerance Technology Transactions Institute Engineering Austral. Mech. Engr. Vol. ME5, No. 2, 1980, p. 82-88.
ABSTRACT
Gossard, D.C., Zuffante, R.P. and Sakurai, H.
Representing Dimensions, Tolerances, and Features in MCAE Systems Computer Graphics & Application, March 1988, pp. 51-59
ABSTRACT
Greenhow, J.N. and Butterworth, N.A.
Tolerancing of Components for Assembly. Engineering Designer V.6, pp.26-29. March 1980
ABSTRACT
Greenwood, W. H. and Chase, K. W.
A New Tolerance Analysis Method for Designers and Manufacturers J. of Engineering for Industry, ASME, vol 109, May 1987, pp.112- 116
ABSTRACT
Greenwood, W. H. and Chase, K. W.
Worst Case Tolerance Analysis with Nonlinear Problems J. of Engineering for Industry, ASME, vol 110, Aug. 1988, pp. 232-235
ABSTRACT
Griffith, Gary
Tolerancing symbols Quality, June 1984, pp. 91-92
ABSTRACT
Grossman, D.D.
Monte Carlo Simulation of Tolerancing in Discrete Parts Manufacturing and Assembly. Stanford Artificial Intelligence Laboratory Memo AIM-280 Computer Science Department Report No. STAN-CS-76-555, May 1976
ABSTRACT
Guilford, James
GEOS Tolerance Analysis: Examples July 2, 1992
ABSTRACT
Guilford, James, Sethi, Mani
Tolerance Analysis of CATIA Models Using the GEOS Key User's Guide for GEOS Version 1.4.0., March 11, 1992
ABSTRACT
Guilford, James, Turner, Joshua
Advanced Tolerance Analysis and Synthesis for Geometric Tolerances CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn,Michigan,June 17-19,1993,pp. 187-198
ABSTRACT
Gutmann, Fredrick T.
Limits and Fits by The Numbers and Letters Mechanical Engineering, November 1987, pp. 68-72.
ABSTRACT
Hahn, G. J., and S. S. Shapiro
Statistical Models in Engineering John Wiley & Sons 1967
ABSTRACT
Hambleton, Fred
Extracting Data from Mainframe CAD Systems December 1988,Mechanical Engineering,pp. 60-61
ABSTRACT
Hanka, W.
Equations Predict Chance of Misfit in Assembly Product Engineering, May 26, 1958, pp. 61-63.
ABSTRACT
Harry, Mikel J. and Reigle Stewart
Six Sigma Mechanical Design Tolerancing Publication No. 6s-2-10/88, Motorola Corporation, 1988
ABSTRACT
Hasofer, A.M., Lind, N.C.
Exact and Invariant Second-Moment Code Journal of the Engineering Mechanics Division, ASCE, Feb. 1974, pp. 111-121
ABSTRACT
Heath, H.H.
Statistical Tolerancing of Engineering Components: Is it Worth It? Precision Engineering, 1979 p. 153-156.
ABSTRACT
Held, David O.
Assembly Variation Analysis: Liberty's Process Driven Design Tool for Quality SAE Technical Paper Series, 880606International Congress and Exposition, Detroit, MI, Feb 29 - Mar 4, 1988
ABSTRACT
Henzold, Georg
Comparison of Vectorial Tolerancing and Conventional Tolerancing Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 147-160
ABSTRACT
Hernla, Michael
Calculation of Measuring Uncertainty with CMMs under Industrial Conditions Proceeding fo 3rd CIRP Seminars on Computer Aided Tolerancing, Cachan, France, April 27-28, 1993, pp. 171-178
ABSTRACT
Hillier, Frederick S. and Lieberman, Gerald J.
Introduction to Operations Research Holden-Day, Inc., 1986.
ABSTRACT
Hillyard, R.C.
The Build Group of Solid Modelers. IEEE Computer Graphics of Appl., March 1982, pp. 43-52
ABSTRACT
Hillyard, R.C. and Braid, I.C.
Characterizing Non-Ideal Shapes in Terms fo Dimensions and Tolerances. ACM Computer Graphics,V. 12, W3, 1978, pp. 234-238
ABSTRACT
Hillyard, R.C. and Braid, I.C.
Analysis of dimensions and tolerances in computer-aided mechanical design. Computer-Aided
Design-Volume 10 number, 3 May 1978, pp. 161-166
ABSTRACT
Hochmuth, R.; Meerkamm, H.; Schweiger, W.
An Approach to a General
View on Tolerances in Mechanical Engineering; 2nd International Workshop
on Integrated Product Development IPD 98; Magdeburg; 1998; pp. 65 - 76.
ABSTRACT
Hocken, Robert J., Raja, (Jay)araman, Babu, Uppliappan
Sampling Issues in Coordinate Metrology CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology,Dearborn,Michigan,June 17-19,1993,ASME,pp. 97-112
ABSTRACT
Hoeprich, Michael R.
Geometric Variation Effects on Rolling Element Bearing Life. Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Toleranicng and Metrology, ASME, pp. 167-176
ABSTRACT
Hoffmann, Peter
Analysis of tolerances and process inaccuracies in discrete part manufacturing. Computer-Aided Design, Volume 14 number 2 March 1982, pp. 83-ff.
ABSTRACT
Hook, Richard
Keynote Address, Interaction of Dimensioning, Tolerancing, and Metrology CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn, Michigan, June 17-19, 1993
ABSTRACT
Hopp, Theodore H.
Computational Metrology CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn,Michigan,June 17-19,1993,pp. 207-218
ABSTRACT
Humienny, Zbigniew
Language for Dimensional Analysis: The conception of a formal language for structure notiaon in selected, configurations of dimensional chains and system of this language's operational use Proceeding of 3rd CIRP Seminars on CAT, Cachan, France, April 1993, pp. 249-266
ABSTRACT
Hummel, K.E., Wolf, M.L.
Integrating Expert Systems With Solid Modeling Through Interprocess Communications and the Applications Interface Specification Computer in Engineering,ASME,Vol. one,1990,pp.355-360
ABSTRACT
Hura, C.M., Caron, N.O., Kanik, J.A. and Hunt, W.A.
SAE Technical Paper Series SAE Paper 881245
ABSTRACT
Hurt, James
Tolerance Analysis with a Variational Geometry System
ABSTRACT
Hurt, James
A Taxonomy of CAD/CAE Systems Manufacturing Review, ASME, Vol.2, No-3, September 1989, pp. 170-178
ABSTRACT
Iannuzzi, Mark, Snadgren, Eric
Tolerance Optimization Using Genetic Algorithms: Benchmarking with Manual Analysis CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.245-262
ABSTRACT
Inui, Masatomo, Miura, Masahiro
Configuration Space Based Analysis of Position Uncertainties of Parts in An Assembly CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 155-172
ABSTRACT
Inui, Masatomo, Otto, Harald, Kimura, Fumihiko
Algebraic Interpretation of Geometric Tolerances for Evaluating Geometric Uncertainties in Solid Modeling 2nd ACM Solid Modeling, 1993-5
ABSTRACT
Ioannou, Yiannakis A. and Eyada, Osama K.
A Diagnostic Tolerance System Computers Ind. Engng Vol. 17, Nos 1-4, pp. 27-30, 1989.
ABSTRACT
Jablokow, Andrei G., Uicker, John J. Jr., Turcic, David A.
Topological and Geometric Consistency in Boundary Representations of Solid Models Advances in Design Automation-1990,Vol. 1,ASME Publication No. DE-Vol. 23-1, Proceedings of ASME Design Automation Conference, Chicago, IL Sept. 16-19, 1990,pp. 59066
ABSTRACT
Jamieson, Archibald
Introduction to Quality Control Reston, Reston,VA. 1982
ABSTRACT
Jensen, C., Helsel, J.
Engineering Drawing and Design McGraw-Hill Book Co., Second Edition, pp. 70-84, Chapter 5.
ABSTRACT
Johnson, N.L., and J. O. Kitchen
Biometrical Tables for Statisticians Cambridge University Press, 1976
ABSTRACT
Johnson, R.H.
How to Evaluate Assembly Tolerances Product Engineering, Jan. 1953, pp. 179-181.
ABSTRACT
Kanai, Satoshi, Onozuka, Mamoru, Takahashi, Hidetomo
Optimal Tolerance Synthesis by Genetic Algorithm under the Machining and Assembling Constraints CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.263-282
ABSTRACT
Kanayama, Sunshine
Taguchi Rules in some Japanese Standardizations of Tolerancing CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.229-244
ABSTRACT
Kane, Victor E.
Process Capability Indices Journal of Quality Technology, Vo. 18, No 1, January 1986, pp. 41-52
ABSTRACT
Kase, Kiwamu
An Evaluation of Geometrical Errors by Segmentation with Fitting Form Error Features. CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on CAT, Japan, April 5-6, 1995, pp. 357-365
ABSTRACT
Kececioglu, D., Lamarre, G.
Mechanical Reliability Confidence Limit Journal of Mechanical Design, 1978,pp. 607-612
ABSTRACT
Kennedy, Clifford W. and Andrews, Donald E.
Inspection and Gaging M.F. Spotts in 3 books
ABSTRACT
Kim, S H, Lee, K
An Assembly Modelling System for Dynamic and Kinematic Analysis Computer-Aided Design,v.21,N1,Jan/Feb 89, pp.2-12
ABSTRACT
Kline, W.A., DeVor, R.E. and Shareef, I.A.
The Prediction of Surface Accuracy in End Milling. ASME Paper
ABSTRACT
Knauer, Karl and Hans-Jörg Pfleiderer
Yield enhancement realised for analogue integrated filters by design techniques IEE Proc., Vol. 129, Pt. G, No. 4, August 1982, p. 122-126
ABSTRACT
Koplewicz, Danielle
Specification by tolerances zone-Current situation and evolutions Proceeding of 3rd CIRP Seminars on CAT, Cachan, France, April 1993, pp. 213-222
ABSTRACT
Kuntze, Robert
The Toleranced Design of the Model 520 Computer Hewlett-Packard Journal May 1984
ABSTRACT
Latta, Lester W.
Least-Cost tolerancing Product Engineering September 16, 1963
ABSTRACT
Laurance, Neal
A High Level View of Step- A Formal Specification of the Information Content of a Product Design. Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 37-48
ABSTRACT
Law, Averill M.
How To Build Valid, Credible and Appropriately Detailed Simulation Models. Industrial Engineering, pp. 16-17, April 1990
ABSTRACT
Lee, Kunwoo and Andrews, Guy
Inference of the positions of components in an assembly: part 2 Computer-aided design, Vol 17, no.1 Jan/Feb 1985, pp. 20-24
ABSTRACT
Lee, Woo Jong, and Tony C. Woo
Tolerancing: Its Distribution, Analysis, and Synthesis Technical Report No. 86-30, University of Michigan, Dept of Industrial and Operations Engineering, December 1986
ABSTRACT
Lee, Woo-Jong and Tony C. Woo
Optimum Selection of Discrete Tolerances Technical Report No. 87-34, University of Michigan, Dept of Industrial and Operations Engineering, Dec. 1987
ABSTRACT
Lee, Woo-Jong, Woo, T.C.
Tolerances: Their Analysis and Synthesis Journal of Engineering for Industry. Vol. 112/113, May 1990
ABSTRACT
Lehtihet, E.A. and Dindelli, B.A.
TOLCON: Microcomputer-Based Module for Simulation of Tolerances. Manuf. Ref. Vol.2, Num.3, Sept 1989. pp.179-188.
ABSTRACT
Lehtihet, E.A. and N.U. Gunasena
Models for the Position and Size Tolerance of a Single Hole Manufacturing Metrology, ASME Publication No PED-Vol 29, 1988, pp. 49-63.
ABSTRACT
Lenz, R.G.
Roundness Measurement, Part Three-Applying the Standard Mechanical Engineering, Dec. 1969, pp. 30-36.
ABSTRACT
Leveaux, Florence, Bourdet, Pierre, Lartique, Claire
Geometrical validation of Dimensioning and tolerancing specifications Proceeding of 3rd CIRP Seminars on CAT, Cachan, France, April 1993, pp. 233-248
ABSTRACT
Levy, S.J.
Applied Geometric Tolerancing TAD Products Corp., 1974
ABSTRACT
Liggett, J.V.
The Boundary Concept of Position Tolerance Society of Automotive Engineers, SAE Paper No. 680489
ABSTRACT
Light, Robert and David Gossard
Modification of Geometric Models Through Variational Geometry Computer-Aided Design, Vol. 14, No. 4, July 1982, p. 209-214
ABSTRACT
Lin, Chin-Wen
A Statistical Analysis Tool for Variation Simulation Modeling Computers & Industrial Engineering, Vol. 13, Nos. 1-4, pp. 386-391, 1987
ABSTRACT
Lin, V.C., Gossard, D.C., and Light, R.A.
Variational Geometry in Computer -Aided Design Computer Graphics, vol. 15, Num. 3, Aug. 1981, pp. 171-177
ABSTRACT
Linares, Jean Marc, Marty, Claude
Tolerancing by functional group Proceeding of 3rd CIRP Seminars on CAT, Cachan, France, April 1993, pp. 267-277
ABSTRACT
Little, R.E.
Statistical Tolerance Limits for Censored Log-Normal Data Journal of Testing and Evaluation, Vol. 8, No. 2, March 1980, pp. 80-84
ABSTRACT
Liu, S., Dong, Z.
A Solid Boundary Based Tolerance Representation Model Advances in Design Automation - DE-Vol. 44-2, ASME 1992
ABSTRACT
Loewen, E.G..
Microinch Accuracy...Really? American Machinist, Vol. 111, Number 12, June 5, 1967, pp. 135-141
ABSTRACT
Lorenz, G.
Dimensional Analysis of Production Processes National Standards Laboratory Technical Paper No.13, 1960 Australia
ABSTRACT
Lu, Stephen C-Y., Wilhelm, Robert G.
Automating Tolerance Synthesis: A Framework and Tools Journal of Manufacturing Systems. Vol. 10, N4, pp. 279-296.
ABSTRACT
Luby, S.C., Dixon, J.R., Simmons, M.K.
Designing With Features: Creating and Using a Features Data Base for Evaluation of Manufacturability of Castings. Computers in Engineering Conference Proceedings. Vol. 1, pp. 285-292, 1986 ASME
ABSTRACT
Luzadder, P.E.
Graphics for Engineers Prentice-Hall, Inc., Englewood Cliffs, N.J., 1957, pp. 424-435, Chapter 16.
ABSTRACT
Luzadder, W.J. P.E.
Fundamentals of Engineering Drawing Fourth Edition, Prentice-Hall, Inc. pp. 354-365, Ch. 15
ABSTRACT
Lynch, A.F., Vanderploeg, M.J.
A Symbolic Formulation for Linearization of Multibody Equations of Motion. Computer in Engineering,ASME,Vol. one,1990, pp. 201-207
ABSTRACT
.gif)
