ADCATS Research Bibliography M through R
Home | ADCATS Info | Search | Site Map | Bulletin Board | Reports & Publications | Bibliography | Contact Us
Bibliography M through R
Home : Tolerancing Bibliography : M through R

Machining Tolerances
Machining Tolerances Product Engineering, May 1957, p. 219

ABSTRACT

Maeda, Toshio, Yonekura, Daisuke, Tokuoka, Naochika
Toleranced Feature Modeling by Constraint of Degree of Freedom for Assignment of Tolerance CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 121-130

ABSTRACT

Magleby, Spencer P., Jackson, David B.
A Standardized Application Interface for Geometric Modelers Product Modeling for Computer-Aided Design and Manufacturing, IFIP, 1991, pp. 227-243

ABSTRACT

Mallik, Asok K. and Sanjay G. Dhande
Analysis and Synthesis of Mechanical Error In Path-Generating Linkages Using A Stochastic Approach Mech. Mach. Theory, Vol. 22, No. 2, pp. 115-123, 1987.

ABSTRACT

Manocha, Dinesh
Solving Polynomial Systems for Curve, Surface and Solid Modeling 2nd ACM Solid Modeling 1993-5

ABSTRACT

Mansoor, E.M..
Application of Probability to Tolerances Used in Engineering Designs Proc. Instn. Mech. Engrs, Vol 178, Pt 1 No 1, 1963, pp. 29-51

ABSTRACT

Marrelli, Richard S.
Specifications with Geometric Tolerancing Machine Design, Aug. 22, 1985, pp. 119-122.

ABSTRACT

Marrelli, Richard S.
New Rules for Dimensioning and Tolerancing Drawings Machine Design, March 11, 1982, pp. 215-218.

ABSTRACT

Marshall, C.W., Maringer, R.E.
Dimensional Instability, an Introduction Pergamon Press, Inc., Chapter 1-5

ABSTRACT

Martino, P., Gabriele, G.A.
A Review of Tolerance Design TEchniques for Computer Integrated Manufacturing. ASME Computers in Engineering, Vol. 2, 1987,pp. 343-350

ABSTRACT

Martino, P.M., Gabriele, G. A.
Estimating Jacobian and Constraint Matrices in Variational Geometry Systems Failure Prevention and Reliability, ASME Paper DE-Vol. 16, 1989, pp. 79-84.

ABSTRACT

Martino, P.M., Gabriele, G.A.
Application of Variational Geometry to the Analysis of Mechanical Tolerances Failure Prevention and Reliability-1989,ASME Publications,De-Vol. 16,pp. 19-27

ABSTRACT

Martinsen, Kristian
Vectorial Tolerancing for All Types of Surfaces Advances in Design Automation, DE-Vol. 65-2, ASME 1993

ABSTRACT

Martinsen, Kristian
Statistical Process Control Using Vectorial Tolerancing CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.195-210

ABSTRACT

Mauritzson, B.H.
Cost Cutting with Statistical Tolerances Machine Design, Nov. 25, 1971, pp. 78-81

ABSTRACT

Mauritzson, B.H.
Cost Cutting with Statistical Tolerances Machine Design, Nov. 25, 1971,pp. 78-81

ABSTRACT

McCallister, Jeff
Solid Modeling Investigation HP Property, 6 July 1987, Disc Memory Division

ABSTRACT

McKim, Paul E.
Strategy for Managing Standards CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, Dearborn, Michigan, June 17-19, 1993

ABSTRACT

Meagley, Nelson G.
Factors of Safety In Tolerance Specifications Product Engineering, March 1953, pp. 155-159

ABSTRACT

Michael, W., and Siddall, J.N.
The Optimization Problem With Optimal Tolerance Assignment and Full Acceptance J. of Mechanical Design, ASME, Oct. 1981, Vol 103, pp. 855-860

ABSTRACT

Michael, W., and Siddall, J.N.
The Optimal Tolerance Assignment with Less Than Full Acceptance Journal of Mechanical Design, ASME, vol 104, Oct. 1982, pp. 855-860.

ABSTRACT

Michael, W., Siddall, J.N.
The Optimization Problem with Optimal Tolerance Assignment and Full Acceptance ASME Paper, 80-DET-47

ABSTRACT

Michalec, Geroge W.
The Value of Probabilistic Techniques in Design ASME, Design Technology Transfer, October 5-9, 1974 p.483.

ABSTRACT

Michelena, Nestor F., Agogino, Alice M.
Formal Solution of N-Type Taguchi Parameter Design Problems with Stochastic Noise Factors DE-Vol. 31, Design Theory and Methodology, pp. 13-20

ABSTRACT

Mischke, C.R.
A Rationale for Mechanical Design to a Reliability Specification ASME Publ. Design Technology Transfer October 5-9, 1974.

ABSTRACT

Mischke, C.R.
Stochastic Methods in Mechanical Design: Part 1: Property Data and Weibull Parameters Failure Prevention and Reliability, ASME Publ. DE-Vol 16 pp. 1-10. 1989.

ABSTRACT

Mischke, C.R.
Stochastic Methods in Mechanical Design: Part 2: Fitting the Weibull Districution to the data Failure Prevention and Reliability, ASME Publ. DE-Vol 16 pp.11-15. 1989.

ABSTRACT

Mischke, C.R.
Stochastic Methods in Mechanical Design: Part 3: A Methodology. Failure Prevention and Reliability, ASME Publ. DE-Vol 16 pp.17-20. 1989.

ABSTRACT

Mischke, C.R.
Stochastic Methods in Mechanical Design: Part 4: Applications Failure Prevention and Reliability, ASME Publ. DE-Vol 16 pp.21-28. 1989.

ABSTRACT

Mischke, Charles R.
A Caution in the Matter of Confidence Bounds on Measurements ASME Publ. Design Technology Transfer October 5-9, 1974.

ABSTRACT

Mischke, Charles R.
Implementing Mechanical Design to a reliability Specification ASME Publ. October 5-9, 1974. Design Technology Transfer.

ABSTRACT

Mischke, Charles R.
Some Tetative Weibullian Descriptions of the Properties of Steels, Aluminums, and Titaniums Design Engineering Division , 71-Vibr-64, ASME paper, June 1971

ABSTRACT

Monte, M. E., and Datseris, P.
Optimum Tolerance Selection for Minimum Manufacturing Cost and Other Criteria ASME Paper No. 82-DET-35, 1982

ABSTRACT

Monte, M.E., Datseris P.
Optimum Tolerance Selection For Minimum Manufacturing Cost and Other Design Criteria American Society of Mechanical Engineers,82-DET-35

ABSTRACT

Mullins, S.H., Anderson, D.C.
A Positioning Algorithm for Mechanical Assemblies with Closed Kinematic Chains in Three Dimensions Purdue university

ABSTRACT

Murphy, R.B.
Non-parametric Tolerance Limits p. 581####

ABSTRACT

Nassef, Ashraf O., Elmaraghy, Hoda A.
Allocation of Tolerance Types and Values using Genetic Algorithms Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing, Cachan, France, April 27-28, 1993,pp. 147-156

ABSTRACT

Nassef, Ashraf O., ElMaraghy, Holda A.
Probabilistic Analysis of Geometric Tolerances CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.211-228

ABSTRACT

Nelson, W.
The Truncated Normal Distribution-With Applications to Component Sorting Industrial Quality Control, Nov. 1967, pp. 261-171.

ABSTRACT

Nelson, Wayne
The Truncated Normal Distribution-With Applications to Componenet Sorting Industrial Quality Control, November 1967. pp. 261-271. Cited by M.F. Spott's 1983 book.

ABSTRACT

Neumann, Alvin g.
The New ASME Y14.5M Standard on Dimensioning and Tolerancing Michigan, June 17-19, 1993, CRTD-Vol.27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp.7-18

ABSTRACT

Nielsen, L.M.
Shop-Run Tolerances, Part 2 Product Engineering, June 1948, pp. 141-145.

ABSTRACT

Nielsen, L.M.
Shop-Run Tolerances, Part 1 Product Engineering, May 1948, pp. 142-144.

ABSTRACT

Nigam, Swami D., Guilford, James D., Turner, Joshua U.
Derivation of Generalized Datum Reference Frames for Geometric Tolerance Analysis DE-Vol. 65-2, Advances in Design Automation-Volume 2,ASME 1993

ABSTRACT

Nikravesh P.E., Gim, G.
Systematic Construction of the Equations of Motion for Multibody Systems Containing Closed Kinematic Loops Advances in Design Automation-ASME DE-Vol.19-3,Proc. of ASME Design Automation Conf., Montreal, Canada,Sept. 17-21, 1989,pp. 27-33

ABSTRACT

Nooss, W.
A Numerical Way of Optimizing Chains of Tolerances ASME Paper No. 81-DET-92 June 1989

ABSTRACT

Norton, Mary R.
Development of STANDARDS for ARMY ORDNANCE FINISHES Cited by M.F. Spotts in 1983 book.

ABSTRACT

O'Leary, J.R.
A Computer Simulation of a True position Feature Pattern Gage Transactions of the ASME, July 1983, Vol. 105, pp. 280-285Also: ASME Paper No. 81-DE-9

ABSTRACT

Ostwald, P.F.
Modeling Dimensions and Tolerances by Simulation ASME Paper No.71-DE-5, 1971

ABSTRACT

Ostwald, P.F., and Huang, J.
A Method for Optimal Tolerance Selection J. of Engineering for Industry, ASME, vol 99, Aug. 1977, p. 558-565. Also: ASME Paper No. 76-WA/DE-23.

ABSTRACT

Ostwald, Philip F.
Modeling Dimensions and Tolerances by Simulation ASME Pub. Paper #71-DE-5

ABSTRACT

Otto, Kevin N., Antonsson, Erik K.
Extensions to the Taguchi Method of Product Design DE-Vol. 31, Design Theory and Methodology,ASME 1991,pp. 21-30

ABSTRACT

Otto, W.L. Jr., Finnie, Iain
Unit Manufacturing Processes CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,Dearborn,Michigan,June 17-19,1993,ASME

ABSTRACT

Parkinson, D.B.
The Application of Reliability Methods to Tolerancing ASME, Journal of Mechanical Design, July, 1982, Vol. 104. pp. 612-618

ABSTRACT

Parkinson, D.B.
Equivalent Linear Limit States Civ. Engng. Syst., Vol. 1, December 1984, p 304-310

ABSTRACT

Parkinson, D.B.
Tolerancing of Component Dimensions in CAD Computer-aided Design, Vol. 16, No. 1, January 1984, pp. 25-32.

ABSTRACT

Parkinson, D.B.
Assessment and Optimization of Dimensional Tolerances Computer-Aided Design Volume 17 Number 4 May 1985. pp. 191-199.

ABSTRACT

Parkinson, D.B.
First-order reliability analysis employing translation systems Eng. Struct., Vol 1, October, 1978, p. 31-40.

ABSTRACT

Parkinson, D.B.
Solution for Second Moment Reliability Index Journal of Engineering Mechanics Division, Oct. 1978, pp. 1267-1275

ABSTRACT

Parkinson, D.B.
Reliability Indices Employing Measures of Curvature Reliability Engineering 6 (1983) p. 153-179

ABSTRACT

Parkinson, D. B.
Four-Moment Reliability Analysis for Static and Time-Dependent Problems Reliability Engineering I (1980) 29-42.

ABSTRACT

Parkinson, D.B.
Quadratic Reliability Indices To be published in "Reliability Engineering"

ABSTRACT

Parks, Jean M.
Holistic Appraoch and Advanced Techniques & Tools for Tolerance Analysis & Synthesis CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.301-312

ABSTRACT

Patel, A. M.
Computer-Aided Assignment of Manufacturing Tolerances Proc. of the 17th Design Automation Conference, ASME, Minneapolis, MN., June 1980, pp. 129-133

ABSTRACT

Pegna, Joseph, Guo, Chi
Computational Metrology of the Circle and Applications to Precision Machinery CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on CAT, Japan, April 5-6, 1995, pp. 313-324

ABSTRACT

Peters, J.
Tolerancing the Components of an Assembly for Minimum Cost Journal of Engineering for Industry, ASME, Aug., 1970, pp. 677-682.

ABSTRACT

Pheil, George D.
Probability Applied To Assembly Fits Product Engineering, Nov. 25, 1957, pp. 88-89.

ABSTRACT

Placek, Chester
Mechanical Tolerancing Workshop Quality,December 1989,pp. 16-17

ABSTRACT

Porchet, Michel, Zhang, Genbao
Incorporating Geometrical Tolerances and Processing Inaccuracy into Dimensionsing and Tolerancing DE-Vol. 44-2, Advances in Design Automation-volume 2,ASME 1992, pp. 151-156.

ABSTRACT

Portman, V.T., Shuster, V.G.
Computerized Synthesis of a Theoretical Model of a Three-Plane Dimension Chain Soviet Engineering Research, Vol. 7, No. 8,pp. 57-60

ABSTRACT

Portman, Vladimir T.
Higher order approximation in accuracy computations for complex mechanical systems. Proceeding of 3rd CIRP Seminars on CAT, Cachan, France, April 1993, pp. 197-212

ABSTRACT

Portman, Vladimir T., Weill, Roland D.
Modelling Spatial Dimensional Chains for CAD/CAM Applications CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 73-92

ABSTRACT

Ragon, Dan and Al Spencer
John Deere Assembly Variation of Crawler Track Chain/Shoe Assembly SAE Technical Paper No. 881243, 1988

ABSTRACT

Ramberg, S., Dudewicz, E.J., Tadikamalla, P.R., Mykytka, E.F.
A Probability Distribution and its Uses in Fitting Data Technometrics, Vol. 21, No.2, May 1979, Ref. from Shapiro & Gross-Chapter 7.

ABSTRACT

Ranyak, Paul S., Fridshal, Richard
Features for Tolerancing a Solid Model Research Report

ABSTRACT

Rao, S.S., Gavane, S.S.
Analysis and Synthesis of Mechanical Error in Cam-Follower Systems ASME Paper 80-DET-22, 1980, pp. 1-11.

ABSTRACT

Requicha, Aristides A.G.
Mathematical meaning and Computiational Representation of Tolerance Specifications CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology,Dearborn, Michigan, June 17-19, 1993,pp. 61-68

ABSTRACT

Requicha, Aristides A.G.
Representation of Geometric Features, Tolerances and Attributes in Solid Modelers Based on Constructive Solid Geometry IEEE Journal of Robotics and Automation, RA-2, No.3, pp.156-166, Sept. 1986

ABSTRACT

Requicha, Aristides A.G.
Representation of Tolerances in Solid Modeling: Issues and Alternative Approaches Solid Modeling by Computers: from Theory to Applications, 1984, pp. 3-22.

ABSTRACT

Requicha, Aristides A.G.
Toward a Theory of Geometric Tolerancing The International Journal of Robotics Research, Vol.2, No.4, Winter 1983, pp. 45-60

ABSTRACT

Requicha, Aristides A.G, Voelcker, H.B.
Solid Modeling: A Historical Summary and Contemporary Assessment March 1982,pp. 9-24

ABSTRACT

Rice, W.B.
Setting Tolerances Scientifically Mechanical Engineering, ASME, Dec. 1944, pp. 801-803

ABSTRACT

Rivest, Louis, Fortin, Clement
Tolerance Modeling for 3D Analysis Presenting a Kinematic Formulation Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing,Cachan,France,April 27-28,1993,pp. 51-74

ABSTRACT

Rivest, Louis, Fortin, Clement, Morel, Claude
Tolerancing a solid Model With a Kinematic Formulation Department of Mechanical Engineering, Quebec, Canada.

ABSTRACT

Ross, Sheldon M.
Introduction to Probability and Statistics for Engineers and Scientists John Wiley & Sons,Chapter 12,1987

ABSTRACT

Rossignac, Jaroslaw R.
Constraints in Constructive Solid Geometry Proceedings of the 1986 Workshop on 3D Interactive Graphics, U. Of N. Carolina, Oct. 1986,pp. 93-129

ABSTRACT

Roy, U., Mantooth, K., Pollard, M.D., Liu, C.R.
Tolerance Representation Scheme in solid Model: Part II Advances in Design Automation-1989,Vol. 1,ASME Publ. DE-Vol. 19-1,ASME Design Automation Conf., Montreal, Sept. 1989

ABSTRACT

Roy, Uptal, Fang, Ying-che
Tolerance Representation Scheme for 3-Dimensional Product in Object Oriented Programming Environment CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp. 93-120

ABSTRACT

 

The ADCATS site: Home | ADCATS Info | Search | Site Map | Bulletin Board | Reports & Publications | Bibliography | Contact Us