ADCATS Research Bibliography S through Z
Home | ADCATS Info | Search | Site Map | Bulletin Board | Reports & Publications | Bibliography | Contact Us
Bibliography S through Z
Home : Tolerancing Bibliography : S through Z

Sakurai, Hiroshi, Gossard, David C.
Solid Model Input Through Orthographic Views Computer Graphics,Volume 17,Number 3,July 1983,pp. 243-252

ABSTRACT


Salomons, O.W., Poerink, H.J. Jonge, Slooten, F. van, Houten, F.J.A.M., van, Kals, H.J.J.
A Computer Aided Tolerancing Tool based on Kinematic Analogies CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Yokyo, Japan,April 5-6,1995,pp. 53-72

ABSTRACT


Sandquist, W.L., Enrick, N.L.
Practical Ways to Apply Statistical Tolerancing Product Engineering, May 27, 1963. pp. 47-50.

ABSTRACT


Sayed, Salah E.Y., and Naim A. Kheir
An Efficient Technique for Minimum-Cost Tolerance Assignment Simulation, April 1985, p. 189-195.

ABSTRACT


Schade, George R.
A Probabilistic Model Of Adjustment Of Four-Bar Mechanisms ASME paper 82-DET-43

ABSTRACT


Schade, R.
Probabilistic Models in Computer Automated Slider-Crank Function Generator Design ASME paper 80-DET-48

ABSTRACT


Schall, Ronald C., German, Dennis G.
The Impact of Tolerancing on Gage Repeatability and Reproducibility Studies CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,Dearborn,Michigan,June 17-19,1993,ASME,pp. 113-118

ABSTRACT


Schneider, E.J.
2. Roundness Measurement, Part Two-The Proposed Standard Mechanical Engineering, Nov. 1969, pp. 36-40

ABSTRACT


Schneider, Fabien, Vincent, Joil Remy
The Assembly Function Applied to the Definition, Control and Manufacture of Mechanical Components Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing, Cachan, France, April 27-28, 1993,pp. 129-146

ABSTRACT


Schwint, W.
Analytical Geometry Leads to Accurate Gear Center Coordinates. Product Engineering, April 12, 1965, pp. 99-101

ABSTRACT


Serrano, D., Gossard, D.
Constraint Management in Conceptual Design KBES in Engineering: Planning and Design,pp. 211-224

ABSTRACT


Serrano, D., Gossard, D.C.
Combining Mathematical Models with Geometric Models in CAE Systems Computers in Engineering,ASME,Vol.1,1986,pp.277-284

ABSTRACT


Sethi, Mani, Guilford, James, Turner, Joshua
Worst Case Tolerance Analysis of Daughter Card Assembly, Draft Jume 20, 1991

ABSTRACT


Shah, Jami J., Miller, David W.
A Structure for Supporting Geometric Tolerances in Product Definition Systems for CIM Manufacturing Review, ASME,Vol. 3, No.1, March, 1990

ABSTRACT


Shah, Jami J., Rogers, Mary T., Sreevalsan, Palat C., Hsiao, David W., Mathew, Abraham, Bhatnagar, Anant, Liou, Bongee B., Miller, David W.
The A.S.U. Features Testbed: An Overview Computer in Engineering, ASME,Vol. one, 1990

ABSTRACT


Shah, Jami J., Zhang, Bing-Chun
Attributed Graph Model For Geometric Tolerancing DE-Vol.44-2,Advances in Design Automation-Volume 2,ASME 1992,pp. 133-140

ABSTRACT


Shalon, Dari, Gossard, David, Ulrich, Karl, Fitzpatrick, David
Representing Geometric Viariations in Complex Structural Assemblies on CAD Systems DE-Vol. 44-2,Advances in Design Automation-Volume 2,ASME 1992,pp. 121-132

ABSTRACT


Shapiro, S. S., and A. J. Gross
Statistical Modelling Techniques Marcel Deker, Inc., 1981.

ABSTRACT


Sheppard, S.
Failure Prevention and Reliability-1989 ASME Publ.,DE-Vol. 16

ABSTRACT


Shunmugam, MS
New Approach for Evaluating Form Errors of Engineering Surfaces Computer-aided Design,V.19 n 7,Sept. 1987,pp. 368-ff

ABSTRACT


Siddall, J.N.
Probabilistic Modeling in Design Transactions of the ASME, Vol. 108, September 1986, p. 330-335, Journal of Mech., Transm, and Automation in Design

ABSTRACT


Siddall, J.N., Diab, Y.
The Use in Probabilistic Design of Probability Curves Generated by Maximizing the Shannon Entropy Function Constrained by Moments Journal of Engineering for Industry, ASME, vol 96, August 1975, pp. 843-852

ABSTRACT


Singhal, Kishore and J.F. Pinel
Statistical Design Centering and Tolerancing Using Parametric Sampling IEEE Transactions on Circuits and Systems, Vol. CAS-28, No. 7, July 1981

ABSTRACT


Sitko, Anthony G.
Applying Variation Simulation Analysis to 2-D Problems Applied Computer Solutions, Inc.

ABSTRACT


Smathers, E.W., Ostwald, P.F.
Optimization of Component Functional Dimensions and Tolerances ASME Paper No. 72-DE-18

ABSTRACT


Smith, C.O.
Probability in Mechanical Design Design Technology Transfer,ASME,presented at The Design Engineering Technical Conference, New York City, N.Y.,October 5-8,1974

ABSTRACT


Soderberg, Rikard
CATI: A Computer Aided Tolerancing Interface DE-Vol. 44-2, Advances in Design Automation-Volume 2,ASME 1992,pp.157-164

ABSTRACT


Soderberg, Rikard


Tolerance Allocation Considering Customer and Manufacturer Objectives DE-Vol. 65-2, Advances in Design Automation-volume 2, ASME 1993

ABSTRACT


Sodhi, Rajneet, Turner, Joshua U.
Representing Tolerance and Assembly Infromation in a Feature-Based Design Environment Proceedings of the ASME 1991 Design Automation Conference, Miami, Florida, September 22-25, pp. 101-108

ABSTRACT


Sorensen, Carl D., Nielsen, Dale B., Chase, Kenneth W.
Improved Methods for Tolerance Analysis of Mating Hole Patterns International Design Productivity Conf., Honolulu, HI,Feb. 6-8, 1991

ABSTRACT


Spalding, F.L.
How and When to Specify Tolerances of Form Machine Design, May 15, 1958, pp. 104-11

ABSTRACT


Speckhart, F.H.
Calculation of Tolerance Based on a Minimum Cost Approach J. of Engineering for Industry, ASME, vol. 94, May 1972, pp. 447-453.

ABSTRACT


Spence, Robert, Soin, Randeep Singh
Tolerance Design of Electronic Circuits Addison-Wesley Publishing Company,1988

ABSTRACT


Spotts, J.F.
Quick Way to Compute Tapped-Hole Tolerances Machine Design,June 21, 1979,pp. 114-118

ABSTRACT


Spotts, M.F.
Dimensioning of Assemblies Machine Design, Feb. 20, 1986, pp. 100-101.

ABSTRACT


Spotts, M.F.
Taking the "Play" Out of Bolt-Hole Tolerances Machine Design,June 5, 1979,pp. 88-91

ABSTRACT


Spotts, M.F.
Dimensioning and Gaging Machine Parts From Datums Machine Design, June 6, 1985,pp. 97-100

ABSTRACT


Spotts, M.F.
Dimensioning Tapped Holes for Smooth Assembly Machine Design, Mar. 23, 1978, pp. 55-59.

ABSTRACT


Spotts, M.F.
Predicting Length of Assemblies With Monte Carlo Simulation Machine Design,Nov. 20, 1980,pp. 84-88

ABSTRACT


Spotts, M.F.
A Faster Way To Set Statistical Tolerances Product Engineering, March 21, 1960, pp. 55-57.

ABSTRACT


Spotts, M.F.
The Combination of Uniform Probability Curves in Engineering The American Society of Mechanical Engineers,75-DET-1

ABSTRACT


Spotts, M.F.,1959
An Application of Statistics to the Dimensioning of Machine Parts Journal of Engineering for Industry, ASME, vol. 81, Nov. 1959, pp. 317-322

ABSTRACT


Spotts, M.F.,1972
Application of the Normal Curve to Dimensioning of Assemblies ASME Paper 72-DE-10

ABSTRACT


Spotts, M.F.,1973
Quality Control Analysis: Distribution of the Errors of an Assembly ASME Paper 73-DE-34, 1973

ABSTRACT


Spotts, M.F.,1973
Allocation of Tolerances to Minimize Cost of Assembly J. of Engineering for Industry, ASME, vol 95, Aug. 1973, p. 762-764.

ABSTRACT


Spotts, M.F.,1974
Dimensioning of Clearance Fits with Overlapping Tolerances Using Probability Theory ASME Paper 74-DE-8

ABSTRACT


Spotts, M. F.,1975
Probability Theory for Assemblies with Piece Part Errors Concentrated Near End of Tolerance Limit ASME Paper 75-DE-1, 1975

ABSTRACT


Spotts, M.F.,1975
Tolerancing Determines How Round Parts Take Shape Machine Design, Oct. 16, 1975., pp. 139-141

ABSTRACT


Spotts, M. F.,1975a
1.Simple Guide to TP Dimensioning Machine Design, Nov. 13, 1975, pp. 132-135

ABSTRACT


Spotts, M.F.,1975b
2. Simple Guide to TP Dimensioning Machine Design, Nov. 27, 1975, pp. 66-69

ABSTRACT


Spotts, M. F.,1976c
3. Simple Guide to TP Dimensioning Machine Design, Jan. 8, 1976, pp. 86-90

ABSTRACT


Spotts, M.F.,1976d
4.Simple Guide to TP Dimensioning Machine Design, Jan. 22, 1976, pp. 84-88

ABSTRACT


Spotts, M.F.,1977
Running the Risk of Interference Fits Machine Design, July 21, 1977, pp. 106-111.

ABSTRACT


Spotts, M.F.,1978
How to Use Wider Tolerances Safely, in Dimensioning Stacked Assemblies Machine Design, April 20, 1978, pp. 60-63.

ABSTRACT


Spotts, M.F.,1978
Fast Dimensional Checks-with Statistics Machine Design, Oct. 12, 1978, pp. 170-174.

ABSTRACT


Spotts, M.F.,1983
Dimensioning and Tolerancing for Quantity Production Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1983

ABSTRACT


Spotts, M.F., and C. R. Mischke,1989
Mechanical Engineering Design Fifth Edition, Prentice-Hall, Inc., 1989

ABSTRACT


Srikanth, S.
A Unified Framework for Assembly Modeling Technical Report No: 90023

ABSTRACT


Srikanth, S., Turner, Joshua U.
Toward a Unified Representation of Mechanical Assemblies Engineering with Computers 6,103-112 (1990)

ABSTRACT


Srinivasan, R.S., Wood, Kristin, L.
Fractal-Based Geometric Tolerancing for Mechanical Design,pp. 107-115 DE-Vol. 42,Design Theory and Methodology,ASME 1992

ABSTRACT


Srinivasan, Vijay
Role of Sweeps in Tolerancing Semantics CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Deartborn, Michigan, June 17-19,1993,pp. 69-78

ABSTRACT


Srinivasan, Vijay
Recent Efforts in Mathematization of ASME/ANSI Y14.5M Standard Proceeding of 3rd CIRP Seminars on CAT, Cachan, France, April 1993, pp. 223-232

ABSTRACT


Srinivasan, Vijay, O'Connor, Michael A.
Towards an ISO Standard for Statistical Tolerancing CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.181-194

ABSTRACT


Steel Founders Society
Tolerances Steel Casting Design, Engineering Data File Sec. 3, Steel Founders' Society of America

ABSTRACT


Subramaniam, Srikanth, Turner, Joshua, Sanderson, Arthur
Establishing Part Positions in Assembly Modeling Product Modeling for Cumpter-Aided Design and Manufacturing,pp. 199-226

ABSTRACT


Suri, Rajan, Diehl, Gregory W., Ho, Yu-Chi
Optimization of Manufacturing System Simulations Using Perturbation Analysis and SENSE Proc. Winter S

ABSTRACT


Sutherland, G.H., and Roth, B.
Mechanism Design: Accounting for Manufacturing Tolerances and Costs in Function Generating Problems J. of Engineering for Industry, ASME, vol 97, Feb. 1975, pp. 283-286.

ABSTRACT


Suzuki, Hiromasa, Kase, Kiwamu, Kimura, Fumihiko
Physically Basee Modelling for Evaluating Shape Variations CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.173-180

ABSTRACT


Sweet, Donald H.
Simplified Calculations for the Cumulative Effects of Tolerances Machine Design,Jan 4,'62,pp. 104-109

ABSTRACT


Symons, J.D.
Shaft Geometry-A Major Factor in Oil Seal Performance Transactions of the ASME, Journal of Lubrication Technology, April 1968, pp. 365-375.

ABSTRACT


Takahashi, Kiwamu, Suzuki, Hiromasa, Kimura, Fumihiko
Motion Analysis of Parts with Geometrical Errors Based on Dynamic Simulation Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing, Cahcan, France, April 27-28, 1993,pp. 85-96

ABSTRACT


Takamasu, Kiyoshi, Fukuda, Iturou, Furutani, Ryousyu, Ozono, Shigeo
Data Processing Method for Geometrical Forms with Form Deviations in Coordinate Metrology CIRP/JSPE/ASME Proceeding of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.301-312

ABSTRACT


Tanaka, Fumiki, Ikonomov, Pavel, Okamotoa, Hideaki, Kishinami, Takeshi
Inspection Method for Geometrical TOlerances using Coordinate Measuring Machine CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing, Japan, April 5-6, 1995, pp. 325-336

ABSTRACT


Tarasov, L.P.
Relation of Surface-Roughness Readings to Actual Surface Profile Transactions of ASME, April, 1945; p. 189-196

ABSTRACT


Tarello, W.R.
How Much Clearance for Mating Holes? Use Tabled Tolerances Product Engineering,June 24, 1963

ABSTRACT


Taylor, Barry N., Kuyatt, Chris E.
The New NIST Policy on Statements of Uncertainty* CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology,Dearborn,Michigan,June 17-19,1993,ASME,pp. 79-84

ABSTRACT


Taylor, Benjamin R.
Dimensional Control Through the Tolerancing of the Solid Model Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 161-166

ABSTRACT


Tech Briefs (cont.)
Thermal Tolerance Control Machine Design

ABSTRACT


Tietjen, Gary L. and Mark E. Johnson
Exact Statistical Tolerance Limits for Sample Variances Technometrics, Vol. 21, No. 1, Feb. 1979

ABSTRACT


Tonshoff,Dr.-Ing, E.h. H.K., Erhmann, Dipl.-Ing. M.
Quality Features in CAD-and CAPP- Systems CIRP/JSPE/ASME Proceedings of the 4th CIRP Seminar on Computer Aided Tolerancing,The University of Tokyo,Tokyo,Japan,April 5-6,1995,pp.131-142

ABSTRACT


Traband, Mark T., Joshi, Sanjay, Wysk, Richard A., Cavalier, Tom M.
Evaluation of Straightness and Flatness Tolerances using the Minimum Zone Manufacturing Review,Vol 2,No. 3,September 1989

ABSTRACT


Trucks, H.E.
Designing for Economical Production Society of Manufacturing Engineer, Dearborn, MI, 2nd Ed, 1987

ABSTRACT


Tukey, John W.
The Propagation of Errors, Fluctuations and Tolerances Supplementary Formulas. Technical Report No. 11

ABSTRACT


Turner, J.U., Wozny, M.J., Hoh, D.D.
Tolerance Analysis in a Solid Modeling Environment ASME Computers in Engineering,V2,1987,pp. 169-175

ABSTRACT


Turner, Joshua
Current Tolerancing Packages CRTD-Vol. 27,International Forum on Dimensional Tolerancing and Metrology,ASME,Dearborn,Michigan,June 17-19,1993,ASME,pp. 241-248

ABSTRACT


Turner, Joshua, Gangoiti, Alex Beascoechea
Tolerance Analysis Approaches in Commercial Software Concurrent Engineering,March/april 1991,vol. 1,n2,pp. 11-23

ABSTRACT


Turner, Joshua U.
Research in Automated Tolerancing at RPI 

ABSTRACT


Turner, Joshua U.
Exploiting Solid Models for Tolerance Computations ASME,pp. 88-159

ABSTRACT


Turner, Joshua U.
Automated Tolerancing Using Solid Modeling Technology AUTOFACT,Proceedings,MS88-692,1988

ABSTRACT


Turner, Joshua U.
Relative Positioning of Parts in Assemblies using Mathematical Programming Rensseaer Polytechnic Institute

ABSTRACT


Turner, Joshua U.
Geos Design Overview RPI, June 1, 1990

ABSTRACT


Turner, Joshua U.
New Methods for Tolerance Analysis in Solid Modeling RPI, May 23-15, 1988

ABSTRACT


Turner, Joshua U.
Geos Overview RPI, TR-89047

ABSTRACT


Turner, Joshua U., Srikanth, S.
Constraint Representation and Reduction in Assembly Modeling and Analysis RPI, May 30, 1990

ABSTRACT


Turner, Joshua U., Subramaniam Srikanth, Gupta Suvajit
Constraint Representation and Reduction in Assembly Modeling and Analysis RPI, June 30, 1991

ABSTRACT


Turner, Joshua U., Wozny, Michael J.
The M-Space Theory of Tolerances Advances in Design Automation-1990,Vol. 1,ASME Publication No. DE-Vol. 23-1,Proceedings of ASME Design Automation Conference,Chicago,IL,Sept. 16-19,1990,pp. 217-226

ABSTRACT


Turner, Joshua U., Wozny, Michael J.
A Mathematical Theory of Tolerances Geometric Modeling for CAD Applications,pp. 163-187

ABSTRACT


Turner, Joshua U., Wozny, Michael J.
A Framework for Tolerances Utilizing Solid Models Proceedings of Third Int'l Conf. on Cumputer-Aided Production Engineering, Ann Arbor, MI,June 1-2,1988,pp. 714-723

ABSTRACT


Valaer, Paul, Hall, James
The Problems With Geometric Dimensioning and Tolerancing Machine Design,August 23, 1990,pp. 129-133

ABSTRACT


Velsher, B.
Tolerance Analysis in Electronic Packaging Electonic Packaging and Production

ABSTRACT


Veneziano, D., Grigoriu, M., Cornall, C.A,
Vector-process Models for System Reliability Journal of the Engineering Mechanics Division ASCE, June 1977, pp. 441-461

ABSTRACT


Voelcker, Herbert B.
A Current Perspective on Tolerancing and Metrology Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Toleranicng and Metrology, ASME, pp. 49-60

ABSTRACT


Voelcker, Herbert, Parratt, Steffen, Robinson, Dean
Session 10, The Current State of Affairs Michigan, June 17-19, 1993, CRTD-Vol.27, International Forum on Dimensional Tolerancing and Metrology, ASME, pp. 297-308

ABSTRACT


Wade, O.R.
Tolerance Control in Design and Manufacturing Industrial Press Inc., 1967, pp. 176-177, Chapter 18.

ABSTRACT


Walker, Richard K., Srinivasan, Vijay
Creation and Evolution of the ASME Y 14.5.1M Standard Michigan, June 17-19, 1993, CRTD-Vol. 27, International Forum on Dimensional Tolerancing and Metrology, ASME,pp. 19-30

ABSTRACT


Wallace, J.R., and J.L. Grant
A Least Squares Method for Computing Statistical Tolerance Limits Water Resources Research, Vol 13, No 5, pp. 819-823

ABSTRACT


Wampler, C., Buffinton, K., Shu-hui, J.
Formulation of Equations of Motion for Systems Subject to Constraints Journal of Applied Mechanics,June 1985,Vol. 52/465-47

ABSTRACT


Wang, Nanxin, Ozsoy, Tulga M.
Automatic Generation of Tolerance Chains from Mating Relations Represented in Assembly Models Advances in Design Automation -1990, Vol. 1, ASME Publication No. DE-Vol. 23-1 pp. 227-233

ABSTRACT


Wang, Nanxin, Ozsoy, Tulga M.
Representation of Assemblies for Automatic Tolerance Chain Generation Engineering with Computers 6, 121-126 (1990)

ABSTRACT


Wang, Nanxin, Ozsoy, Tulga M.
A Scheme to Represent Features, Dimensions, and Tolerances in Geometric Modeling Journal of Mfg. Systems,V. 10, N 3,pp. 233-240

ABSTRACT


Wearring, Colin, Cola, Gary
Identifying Sources of Build Variation Using VSA Audit Applied Computer Solutions - 911644

ABSTRACT


Wehage, R.A.
Solution of Multibody Dynamics Using Natural Factors and Iterative Refinement - Part 1: Open Kinematic Loops Advances in Design Automation, ASME Publication.DE 19-3, Sept. 17-21, 1989, pp. 125-132

ABSTRACT


Wehage, R.A.
Solution of Multibody Dynamics Using Natural Factors and Iterative Refinement - Part II: Closed Kinematic Loops Advances in Design Automation, ASME Publication DE 19-3, Sept. 17-21, 1989, pp. 133-139.

ABSTRACT


Wei-Liang, Xu and Zhang Qi-Xian
Probabilistic Analysis and Monte Carlo Simulation of The Kinematic Error in a Spatial Linkage Mech. Mach. Theory Vol. 24, No. 1, pp. 19-27, 1989.

ABSTRACT


Weill, R., Clement, A., Hocken, R., Farmer, L.E., Gladman, C.A., Wirtz, A., Bourdet, P., Freckleton, J.E., Kunzmann, H., Ham, I., Trumpold, H., Matthias, E.
Tolerancing for Function Annals of the CIRP Vol. 37/2/1988,pp. 603-610

ABSTRACT


Wesley, Michael A., Markowsky, George
Generation of Solid Models from Two-Dimensional Data Solid Modeling by Computer: From Theory to Application,Plenum Press,NY,1984,pp. 23-51,MS Pickett & JW Boyse,eds

ABSTRACT


Wilde, D., and Prentice, E.
Minimum Exponential Cost Allocation of Sure-Fit Tolerances J. of Engineering for Industry, ASME, vol 97, Nov. 1975, pp. 1395-1398.

ABSTRACT


Wilde, Doug
Simplifying Discrete Tolerance Assignment ASME Paper 75-DET-106

ABSTRACT


Wilkinson, Roger, I.
The Combination of Probability Curves in Engineering American Institue of Electrical Engineering, Vol. 61, 1942, pp. 953-962.

ABSTRACT


Wirsching, P.H.
On the Behavior of Statistical Models Used for Design Transactions of the ASME, May 1976, pp. 601-606.

ABSTRACT


Wirsching, P.H., Haugen, E.B.
Probabilistic Design of Helical Springs ASME paper 74-WA/DE-21

ABSTRACT


Wirsching, P.H., Jones, L.H.
On the Use of the Extreme Value Distribution in Reliability Anlysis and Design Journal of Engineering for Industry, Transactions of the ASME, Aug. 1976, pp. 1080-1085

ABSTRACT


Wirtz, Adolf
Vectorial Tolerancing Neu-Technikum Buchs, Buchs, Switzerland

ABSTRACT


Wirtz, Adolf
Vectorial Tolerancing A Baic Element for Quality Control Proceeding of 3rd CIRP Seminars on Computer Aided Tolerancing, Cachan, France, April 27-28, 1993,pp. 115-128

ABSTRACT


Wolff, E.R.
Graph Sets Safe Tolerance for Cumulative Dimensions Product Engineering, Jan. 2, 1961. pp. 40-43

ABSTRACT


Xue, Deyi, Dong, Zuomin
Automated Concurrent Design Based on Combined Feature, Tolerance, Production Process and Cost Models DE-Vol. 65-2, Advances in Design Automation-Volume 2 ASME 1993

ABSTRACT


Zhang, Chun, Hsu-Pin, Wang
The Discrete Tolerance Optimization Problem Manufacturing Review, July 1991

ABSTRACT

 


The ADCATS site: Home | ADCATS Info | Search | Site Map | Bulletin Board | Reports & Publications | Bibliography | Contact Us