Adcats Flexible Assembly

FASTA '99:

Tolerance Analysis of Flexible Assemblies Using Finite Element and Spectral Analysis Bryan Bihlmaier, Ken Chase, Craig Smith
	View Presentation

Selected ADCATS Reports: (for complete Reports list click here)

			00-1	Geometric Covariance in Compliant Assembly Tolerance Analysis, (M.S. Thesis) Apr 2000 Stout, Jefferey B.
			99-1	Tolerance Analysis of Flexible Assemblies Using Finite Element and Spectral Analysis, (MS Thesis) Apr 1999 Bihlmaier, Bryan F.
			98-1	Tolerance Analysis of Compliant Assemblies, (PhD Dissertation) Apr 1998 Merkley, Karl G.

ADCATS 2000 Conference: (Note: clicking on these presentations will take you to the conference page)

Variation Modeling and Design in Compliant Assemblies Jack Hu and Kaushik Iyer, University of Michigan
	Read abstract View presentation online Download presentation (5.3 MB)

Modeling Surface Variations for Flexible Assemblies Shrinivas Soman, Unigraphics
	Read abstract View presentation online Download presentation (175 kb)

Geometric Covariance in Compliant Assembly Tolerance Analysis Jeff Stout, Boeing/Rocketdyne
	Read abstract View presentation online Download presentation (1.3 MB)

ADCATS 2001 Conference: (Note: clicking on these presentations will take you to the conference page)

Position Error in Assemblies and Mechanisms: Statistical and Deterministic Methods Jonathan Wittwer, Brigham Young University
	Read abstract View presentation online Download presentation (1.5 MB)

Tolerance Analysis of Flexible Assemblies Michael Tonks, Brigham Young University.
	Read abstract View presentation online Download presentation (2.5 MB)

Surface Variation and Mating Surface Rotational Error in Assemblies Taylor Anderson, UGS
	Read abstract View presentation online Download presentation (1.4 MB)