| Home | About Us | Search | Site Map | Publications | Bibliography | Contact Us |
|
|||||||
|
You may view many of them in pdf or html format.
| On this page: | Also available: |
|
|
Reports List
| 06-2 | Variation Analysis of Involute Spline Tooth Contact, 2006.
DeCaires, Brian J. K. |
|||
| 06-1 | Predicting Deformation of Compliant Assemblies Using Covariant Statistical Tolerance Analysis, 2006.
Tonks, M. R., Chase, K. W., and Smith, C. C. |
|||
| 04-5 | The Direct Linearization Method Applied to Position Error in Kinematic Linkages, 2004.
Wittwer, J. W., Chase, K. W., and Howell, L.L. |
|||
| 04-4 | Tolerance Analysis and Design of Nesting Forces for Exactly Constrained Mechanical Assemblies, 2004.
Pearce, E., Parkinson, A., and Chase K. W. |
|||
| 04-3 | Covariance Modeling Method for Use in Compliant Assembly Tolerance Analysis, 2004.
Tonks, M., and Chase, K. W. |
|||
 |
 |
04-2 | Variation Simulation of Fixtured Assembly Processes for Compliant Structures Using Piecewise-Linear Analysis, 2004.
Stewart, Michael L. |
|
|
03-1 | Basic Tools for Tolerance Analysis of Mechanical Assemblies, 2003.
Chase, K. W. |
||
| 02-6 | "CAD-Based Tolerance Analysis of 2D and 3D
Mechanical Assemblies," 2002. Chase, K. W. |
|||
| 02-5 | "The Direct Linearization Method Applied to
Position Error in Kinematic Linkages," 2002. Wittwer, J.W., Chase, K.W., and Howell, L.L. |
|||
| 02-4 | “An Introduction to Smart Assemblies for
Robust Design,” in review. Downey, K., A. Parkinson and K. Chase |
|||
| 02-3 | “Smart Assemblies for Robust Design: A
Progress Report,” 2002. Downey, K., A. Parkinson and K. Chase |
|||
| |
|
02-2 | An Integrated Methodology for Statistical Tolerance
Analysis of Flexible Assemblies, 2002. Mortensen, Alan J. |
|
| 02-1 | A Robust Geometric Covariance Method for Flexible
Assembly Tolerance Analysis, 2002. Tonks, Michael |
|||
| 01-4 | “Predicting the Position Error in Kinematic
Linkages: A Comparison of Deterministic and Probabilistic Methods,” 2001. Wittwer, J. W., K. W. Chase and L. W. Howell |
|||
| |
|
01-3 | Constraint Analysis of Assemblies Using Screw
Theory and Tolerance Sensitivities, 2001. Smith, Daniel K. |
|
| |
|
01-2 | Incorporating Geometric Feature Variation with
Kinematic Tolerance Analysis of 3D Assemblies, 2001. Dabling, Jeffrey G. |
|
| 01-1 | Modeling the Effects of Joint Clearances in
Planar Micromechanisms, 2001. Wittwer, J. W., L. L. Howell and K. W. Chase |
|||
| |
|
00-3 | A Closed Formed Solution For Nonlinear Tolerance
Analysis, 2000. Carlson, Geoffry K. |
|
| |
|
00-2 | A Second-Order Method for Assembly Tolerance
Analysis, 2000. Glancy, C. G., and K. W. Chase |
|
| 00-1 | Geometric Covariance in Compliant Assembly
Tolerance Analysis, (M.S. Thesis) Apr 2000 Stout, Jefferey B. |
|||
| |
|
99-6 | Tolerance Allocation Methods for Designers,
1999 Chase, K. W. |
|
| |
|
99-5 | Minimum-Cost Tolerance Allocation,
1999 Chase, K. W. |
|
| |
|
99-4 | Tolerance Analysis of 2-D and 3-D Assemblies,
1999 Chase, K. W. |
|
| |
|
99-3 | Tolerance Analysis of Assemblies Using
Kinematically Derived Sensitivities, (MS Thesis) Aug 1999 Faerber, Paul J. |
|
| |
|
99-2 | Functional Surface Characterization for Tolerance
Analysis of Flexible Assemblies, (MS Thesis) Aug 1999 Soman, Shrinivas M. |
|
| |
|
99-1 | Tolerance Analysis of Flexible Assemblies Using
Finite Element and Spectral Analysis, (MS Thesis) Apr 1999 Bihlmaier, Bryan F. |
|
| |
 |
|
98-3 | Global Coordinate Method for Determining Sensitivity
in Assembly Tolerance Analysis, Nov 1998 Gao, J., and K. W. Chase, and S. P. Magleby |
| |
|
|
98-2 | New Metrics for Evaluating Monte Carlo Tolerance
Analysis of Assemblies, Nov 1998 Cvetko, R., and K. W. Chase, and S. P. Magleby |
| |
|
98-1 | Tolerance Analysis of Compliant Assemblies, (PhD
Dissertation) Apr 1998 Merkley, Karl G. |
|
| |
|
|
97-5 | Tolerance Analysis of 2-D and 3-D Mechanical Assemblies
with Small Kinematic Adjustments, 1997 Chase, K. W., J. Gao, and S. P. Magleby |
|
|
|
97-4 | A Comprehensive System for Computer-Aided Tolerance
Analysis of 2-D and 3-D Mechanical Assemblies, Apr 1997 Chase, K. W., and S. P. Magleby, and C. G. Glancy |
|
|
97-3 | Characterization of Assembly Variation Analysis
Methods, (MS Thesis) Aug 1997 Cvetko, Robert |
|
| 97-2 | Identifying Critical Part Dimensions for Tolerance
Analysis Using Constrained CAD Models, (MS Thesis) Aug 1997 Warnick, Ryan W. |
|||
| 97-1 | Surface Variation and Mating Surface Rotational
Error in Assemblies," (MS Thesis) Apr 1997 Anderson, Taylor B. |
|||
| 96-3 | An Introduction to Tolerance Analysis of Flexible
Systems, Jun 1996 Merkeley, Karl G., K. W. Chase and E. Perry |
|||
| 96-2 | Variation Polygon - a New Method for Determining
Tolerance Sensitivity in Assemblies, May 1996 Huo, Hanqi, and K. W. Chase |
|||
|
|
96-1 | Multivariate Statistical Analysis of Assembly
Tolerance Specifications, (MS Thesis) Apr 1996 Law, Marvin J. |
|
| |
95-4 | New Tolerance Analysis Methods for Preliminary
Design, (PhD Dissertation) Dec 1995 Huo, Han Qi |
||
|
|
95-3 | Characterizing Kinematic Variation in Assemblies
from Geometric Constraints, (MS Thesis) Oct 1995 Stoddard, James R. |
|
|
|
|
95-2 | Comparison of Assembly Tolerance Analysis by the
Direct Linearization and Modified Monte Carlo Simulation Methods, Sep 1995 Gao, J., K. W. Chase and S. P. Magleby |
|
|
95-1 | Statistical Models for Position and Profile
Variation in Mechanical Assemblies, (MS Thesis) Apr 1995 Brown, Christopher T. |
|
|
|
94-5 | A Second-Order Method for Assembly Tolerance
Analysis, (MS Thesis) Dec 1994 Glancey, Charles G. |
|
|
94-4 | A User Interface Specification for CAD/CAM Application Development, (MS Thesis) Aug 1994 Cheney, Douglas C. |
||
|
|
|
94-3 | Including Geometric Feature Variations in Tolerance
Analysis of Mechanical Assemblies, Aug 1994 Chase, K. W., Jinsong Gao, S. W. Magleby and C. D. Sorensen |
|
|
|
94-2 | General 3-D Tolerance Analysis of Mechanical
Assemblies with Small Kinematic Adjustments, Jul 1994 Gao, Jinsong, K. W. Chase and S. W. Magleby |
|
|
|
94-1 | General 2-D Tolerance Analysis of Mechanical
Assemblies with Small Kinematic Adjustments, Apr 1994 Chase, K. W., Jinsong Gao and S. W. Magleby |
| |
93-3 | Nonlinear Tolerance Analysis of Mechanical
Assemblies, (PhD Dissertation) Aug 1993 Gao, Jinsong |
||
|
|
93-2 | A Comprehensive System for Modeling Variation in
Mechanical Assemblies, (MS Thesis) Apr 1993 Trego, Angela |
|
|
|
93-1 | A Comprehensive Method for Specifying Tolerance
Requirements for Assemblies, (MS Thesis) Apr 1993 Carr, Charles D. |
|
|
|
92-1 | Integrating Geometric Form Variations into
Tolerance Analysis of 3-D Assemblies, (MS Thesis) Aug 1992 Ward, Kerry |
|
|
|
91-4 | Representation and Modeling of Geometric Form
Variations for 3-D Tolerance Analysis, (MS Thesis) Aug 1991 Goodrich, Callis G. |
|
|
|
91-3 | A Generalized Approach to Kinematic Modeling for
Tolerance Analysis of Mechanical Assemblies, (MS Thesis) Aug 1991 Larsen, Glen C. |
|
| 91-2 | A Bibliography on Tolerance Analysis of Mechanical
Assemblies, Apr 1991 Chase, K. W. |
|||
|
|
|
91-1 | A Survey of Research in the Application of Tolerance
Analysis to the Design of Mechanical Assemblies, Apr 1991 Chase, K. W., and A. R. Parkinson |
| 90-5 | CATIA/CATS User Guide, Dec 1990 Goodrich and K. W. Chase |
|||
| Out of print | 90-4 | Tolerance Modeling and Analysis Application for
CATIA -- Initial Specifications, Jul 1990 Goodrich, C., and K. W. Chase |
||
|
|
90-3 | A Closed-Form Model for Tolerance Analysis of
Two-Dimensional Mating Hole Patterns, (MS Thesis) Aug 1990 Peterson, Douglas M. |
|
|
|
90-2 | General System for Least Cost Tolerance Allocation
in Mechanical Assemblies, (MS Thesis) Aug 1990 Andersen, Carl B. |
|
|
|
90-1 | Automated Vector Loop Generation for Kinematic Models
of Mechanical Assemblies, (MS Thesis) Aug 1990 Simmons, Andre P. |
|
| Out of print | 89-6 | Tolerance Analysis of Mechanical Assemblies--Part
B: 2-D Tolerance Allocation, Oct 1989 Andersen, C. B., K. W. Chase and C. D. Sorensen |
||
| Out of print | 89-5 | Tolerance Analysis of Mechanical Assemblies--Part
A: 2-D Modeling, Oct 1989 Chase, K. W., C. D. Sorensen and C. B. Andersen |
||
|
|
|
89-4 | Least Cost Tolerance Allocation for Mechanical
Assemblies with Automated Process Selection, Dec 1989 Chase, K. W., W. H. Greenwood, B. G. Loosli and L. F. Hauglund |
|
|
89-3 | A Practical Method for Three-Dimensional Tolerance
Analysis Using a Solid Modeler, (MS Thesis) Jan 1989 Robison, Richard H. |
|
|
89-2 | An Efficient Method for Iterative Tolerance Design
Using Monte Carlo Simulation, (MS Thesis) Jan 1989 Larsen, David V. |
||
|
89-1 | The Application of Convolution Methods to the Statistical
Analysis of Mating Hole Patterns, (MS Thesis) Jan 1989 Nielsen, Dale B. |
||
| 88-8 | HP-CATS: CAD Interface for Computer-Aided Tolerance
Selection. Version 2.0 HP-ME10 CAD System, Dec 1988 Chun, Ki S. |
|||
|
|
88-7 | Development of Two-Dimensional Tolerance Modeling
Methods for CAD Systems, (MS Thesis) Dec 1988 Chun, Ki S. |
|
|
|
88-6 | Nonlinear Tolerance Analysis Using the Direct
Linearization Method, (MS Thesis) Dec 1988 Marler, Jaren D. |
|
| 88-5 | CADAM/CATS: CAD Interface for Computer-Aided Tolerance
Selection. Version 1.1 IBM/CADAM System, Nov 1988 Rime, Craig N. |
|||
| 88-4 | DDM/CATS: CAD Interface for Computer-Aided Tolerance
Selection. Version 1.1 CALMA System, Jul 1988 Chase, K. W., and R. H. Robison |
|||
| Out of print | 88-3 | Root Sum Squares Tolerance Analysis with Nonlinear
Problems, Aug 1988 Greenwood, W. H., and K. W. Chase |
||
| Out of print | 88-2 | Worst Case Tolerance Analysis with Nonlinear
Problems, Aug 1988 Greenwood, W. H., and K. W. Chase. |
||
| Out of print | 88-1 | CADAM/CATS: CAD Interface for Computer-Aided
Tolerance Selection. Version 1.0 IBM/CADAM System, May 1988 Chase, K. W., and Craig Rime |
||
| 87-6 | HP-CATS: CAD Interface for Computer-Aided Tolerance
Selection. Version 1.0 HP/ME10 CAD System, Sep 1987 Chase, K. W., and Ki Soo Chun |
|||
|
|
|
87-5 | Design Issues in Mechanical Tolerance Analysis,
Aug 1987 Chase, K. W., and W. H. Greenwood |
|
|
87-4 | Manufacturing Tolerance Cost Minimization Using
Discrete Optimization for Alternate Process Selection, (MS Thesis) Aug 1987 Loosli, Bruce G. |
|
| 87-3 | Computer-Aided Tolerance Selection: CATS.BYU User
Guide Version 1.1 VAX/VMS, Aug 1987 Chase, K.W., and W.H. Greenwood |
|||
| 87-2 | A New Tolerance Analysis Method for Engineering
Design and Manufacturing, (PhD Dissertation) Mar 1987 Greenwood, W.H., and K.W. Chase, |
|||
| 87-1 | Combining Manufacturing Process Selection and
Optimum Tolerance Allocation in Design Automation, (MS Thesis) Jan 1987 Hauglund, Loren F. |
|||
| 86-5 | Tolerance Analysis as an Integral Part of Design
Optimization, (MS Thesis) Nov 1986 Billings, David T. |
|||
| 86-4 | (Never issued) | |||
| Out of print | 86-3 | Future Plans for CATS.BYU, Aug 1986 Chase, K. W. |
||
| 86-2 | Computer-Aided Tolerance Selection: CATS.BYU User
Guide Version 1.0 VAX/VMS, Sep 1986 Chase, K. W., and W. H. Greenwood |
|||
| 86-1 | A New Tolerance Analysis Method for Designers and
Manufacturers, Sep 1986 Greenwood, William H., and Kenneth W. Chase |
|||
| Out of print | 85-2 | Hierarchical Data Structure for Computer-Aided
Tolerance Analysis, Jul 1985 Chase, K.W., Cory Schofield and Matt Dickerson |
||
| 85-1 | Initial Development of the CATS.BYU Computer Program
for Tolerance Specification, (MS Thesis) Feb 1985 Yang, D., and K.W. Chase |
|||
Publications TOP
| 22 |
Drake, Paul
(editor), Dimensioning and Tolerancing Handbook, McGraw-Hill, 1999. |
|||
| 21 | Parkinson, A. R., K. W. Chase and M. Rogers, "Robust Design Via Tolerance Analysis in the Conceptual Design Stage," Proceedings of the ASME Design Engineering Technical Conferences, Las Vegas, NV, Sept. 12-15, 1999. | |||
|
20 | Glancy, C. G., and K. W. Chase, "A Second-Order Method for Assembly Tolerance Analysis," Proceedings of the ASME Design Engineering Technical Conference, Las Vegas, NV, Sept 12-15, 1999. | ||
| 19 | Cvetko, R., K. W. Chase and S. P. Magleby, "New Metrics for Evaluating Monte Carlo Tolerance Analysis of Assemblies," Proceedings of the ASME International Mechanical Engineering Conference and Exposition, Anaheim, CA, Nov. 15-20, 1998. | |||
| 18 | Gao, J., K. W. Chase and S. P. Magleby, "Global Coordinate Method for Determining Sensitivity in Assembly Tolerance Analysis," Proceedings of the ASME International Mechanical Engineering Conference and Exposition, Anaheim, CA, Nov. 15-20, 1998. | |||
|
|
|
17 | Chase, K. W., S. P. Magleby and C. G. Glancy, "A Comprehensive System for Computer-Aided Tolerance Analysis of 2-D and 3-D Mechanical Assemblies," Proceedings of the 5th CIRP Seminar on Computer-Aided Tolerancing, Toronto, Ontario, April 28-29, 1997. |
| |
|
|
16 | Gao, J., K. W. Chase and S. P. Magleby "General 3-D Tolerance Analysis of Mechanical Assemblies with Small Kinematic Adjustments," IIE Transactions, v 30, pp. 367-377, 1998. |
| |
|
|
15 | Chase, K. W., J. Gao and S. P. Magleby, "Tolerance Analysis of 2-D and 3-D Mechanical Assemblies with Small Kinematic Adjustments," Advanced Tolerancing Techniques, John Wiley, (1997). |
| |
|
|
14 | Chase, K. W., J. Gao, S. P. Magleby and C. D. Sorenson, "Including Geometric Feature Variations in Tolerance Analysis of Mechanical Assemblies," IIE Transactions, v 28, pp. 795-807, 1996. |
| 13 | Merkeley, Karl G., K. W. Chase and E. Perry, "An Introduction to Tolerance Analysis of Flexible Systems," 1996 MSC World Users' Conference, Newport Beach, CA, June 1996. | |||
| 12 | Huo, Hanqi, and K. W. Chase, "Variation Polygon - a New Method for Determining Tolerance Sensitivity in Assemblies," Proceedings CSME Forum, Ontario, Canada, May 7-9, 1996. | |||
| |
|
|
11 | Gao, J., Chase, K. W., and S. P. Magleby, "Comparison of Assembly Tolerance Analysis by the Direct Linearization and Modified Monte Carlo Simulation Methods," Proceedings of the ASME Design Engineering Technical Conferences, Boston, MA, 1995, pp. 353-360. |
| |
|
|
10 | Chase, K. W., J. Gao and S. P. Magleby "General 2-D Tolerance Analysis of Mechanical Assemblies with Small Kinematic Adjustments," J. of Design and Manufacturing, v 5 n 4, 1995. |
| 9 | Sorensen, C. D., D. B. Nielsen, and K. W. Chase, "Improved Methods for Tolerance Analysis of Mating Hole Patterns," Proceedings of the Design Productivity International Conference, Honolulu, Hawaii, Feb. 1991. pp. 595-600. | |||
| |
|
|
8 | Chase, K. W. and A. R. Parkinson "A Survey of Research in the Application of Tolerance Analysis to the Design of Mechanical Assemblies," Research in Engineering Design, v 3, pp.23-37, 1991. |
| 7 | Greenwood, W. H. and K. W. Chase, "Root Sum Squares Tolerance Analysis with Nonlinear Problems," J. of Engineering for Industry, ASME, v 112, pp.382-384, Nov. 1990. | |||
| 6 | Andersen, C. B., K. W. Chase, and C. D. Sorensen, "Recent Developments in Tolerance Analysis Software for Mechanical Assemblies--Part B: 2-D Tolerance Allocation," Proceedings of the Western Regional Meeting of ASQC, Salt Lake City, Utah, October 26-27, 1989. | |||
| 5 | Chase, K. W., C. D. Sorensen and C. B. Andersen, "Recent Developments in Tolerance Analysis Software for Mechanical Assemblies--Part A: Two-Dimensional Modeling," Proceedings of the Western Regional Meeting of ASQC, Salt Lake City, Utah, October 26-27, 1989. | |||
| |
|
|
4 | Chase, K. W., W. H. Greenwood, B. G. Loosli and L. F. Hauglund, "Least Cost Tolerance Allocation for Mechanical Assemblies with Automated Process Selection," Manufacturing Review, ASME, vol 2,no 4, December 1989. |
| 3 | Greenwood, W.H. and K.W. Chase, "Worst Case Tolerance Analysis with Non-linear Problems," J. Engineering for Industry, ASME, vol 110, no 3, August 1988, pp.232-235. | |||
| |
|
|
2 | Chase, K.W. and W.H. Greenwood, "Design Issues in Mechanical Tolerance Analysis," Manufacturing Review, ASME, vol 1,no 1, March 1988, pp. 50-59. |
| 1 | Greenwood, W.H. & K.W. Chase, "A New Tolerance Analysis Method for Designers and Manufacturers," J. Engineering for Industry, May, 1987, pp 112-116. |
Annual Reports of Research to the Navy
TOP
1996
1995
1994